Felicity Solar Hybrid Inverters 5 kW IVGM5KLP1G1
Wall-mounted 5 kW hybrid inverter from Felicity Solar, joining a 40-60 V battery bank to a 6.5 kW PV array through two MPPT trackers, with 25 A maximum output current.
Models and prices
- IVGM5KLP1G1AED 3,105incl. VAT
Technical Specifications
| Parameter | IVGM5KLP1G1 |
|---|---|
| Performance & Electrical | |
| AC Output Voltage | 230 V |
| AC Rated Output Current | 21.7 A |
| AC Wiring Mode | L+N+PE |
| Backup Max Output Current | 30 A |
| Backup Rated Output Power | 5 kW |
| Battery Inputs | 1 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 40-60 V |
| Charge Algorithm | Self-Adaption to BMS |
| Grid Frequency Range (50 Hz) | 45-55 Hz |
| Grid Frequency Range (60 Hz) | 55-65 Hz |
| Grid Regulation | CEI 0-21, G99, VDE 4105, EN 50549-1, NRS 097-2-1, C10/11, NTS & UNE217001 & UNE217002, PORTARIA N° 140 & 515 |
| Ground Fault Current Monitoring | Yes |
| Input Voltage Range | 184-264.5 V |
| MPPT Efficiency | 99.9% |
| MPPT Full-Load Voltage Range | 220-500 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 100-500 V |
| Max AC Charge Current | 100 A |
| Max AC Input Current | 40 A |
| Max AC Output Power | 5 kW |
| Max AC Pass-Through Current | 40 A |
| Max Charge/Discharge Power | 5 kW |
| Max Charging Current | 100 A |
| Max Discharging Current | 100 A |
| Max Efficiency | 97.6% |
| Max Output Current | 25 A |
| Max PV Input Current | 15+15 A |
| Max PV Voltage | 550 V |
| Max Recommended PV Power | 6.5 kW |
| Max Short-Circuit Current | 18+18 A |
| Nominal AC Input Voltage | 230 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Overload Protection | Yes |
| PV Working Voltage Range | 90-550 V |
| Phase | Single Phase |
| Power Factor | >0.99 |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Protection | Output Over Current Protection, Output Over Power Protection, Output Short-Circuit Protection, Anti-islanding Protection, GFCI Protection, Insulation Resistor Detection |
| Rated Apparent Output Power | 5 kVA |
| Rated Output Power | 5 kW |
| Rated PV Input Voltage | 360 V |
| Start-Up Voltage | 130 V |
| Strings per MPPT | 1+1 |
| Surge Rating | 2*rated (10s) |
| Total Harmonic Distortion | <3% |
| Transfer Time | 20 ms |
| Build & Interfaces | |
| BMS Communication | RS485, CAN |
| Communication Interface | RS232, RS485 |
| Display | LCD, LED |
| Gross Weight | 39.1 kg |
| Installation Style | Wall-Mounted |
| Monitoring Module | WiFi/GPRS |
| Net Weight | 32.4 kg |
| Package Dimensions | 632 x 570 x 315 mm |
| Parallel Capability | 6 |
| Safety Standard | IEC 62109-1, IEC 62109-2 |
| Topology | Isolated (transformer-based) |
| Operating Environment | |
| Cooling | Nature |
| IP Rating | IP65 |
| Operating Temperature Range | -25 to 60 (>45 derating) °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 5 kW rated output at 230 V single phase, with 25 A maximum output current and 30 A available on the backup circuit
- Two MPPT trackers working across 100-500 V from a 130 V start-up voltage, taking 15+15 A at up to 550 V PV input
- Up to 6.5 kW of recommended PV power, with battery charge and discharge running to 5 kW and 100 A
- 97.6% peak conversion efficiency and 99.9% MPPT tracking efficiency, with total harmonic distortion under 3%
- 40-60 V battery input for Lead-Acid and Li-Ion banks, with BMS communication over RS485 and CAN
- IP65 wall-mounted enclosure with natural cooling, 32.4 kg net weight, -25 to 60 °C operation and up to 6 units in parallel
Frequently Asked Questions
How large a solar array can the IVGM5KLP1G1 take?
6.5 kW is the maximum recommended PV power for the IVGM5KLP1G1. It is split across two MPPT trackers that work from 100 to 500 V and accept 15+15 A, with a 550 V maximum PV voltage, a 130 V start-up voltage and 99.9% MPPT efficiency.
Which batteries does the IVGM5KLP1G1 support?
40-60 V is the battery voltage range, over a single battery input that accepts Lead-Acid and Li-Ion banks. Charging and discharging run to 100 A and 5 kW, and the BMS is read over RS485 and CAN.
How quickly does the IVGM5KLP1G1 switch to battery when the grid fails?
20 ms is the transfer time. The backup circuit is rated 5 kW with 30 A maximum output current at 230 V, total harmonic distortion stays under 3%, and the surge rating is twice rated power for 10 s.
Can the IVGM5KLP1G1 be installed outdoors, and what warranty does it carry?
IP65 is the enclosure rating, so the wall-mounted unit suits sheltered outdoor walls. It cools naturally, weighs 32.4 kg net and 39.1 kg gross, and works from -25 to 60 °C with derating above 45 °C. The warranty is 2 Years.