Felicity Solar Hybrid Inverters IVGM25KHP3G3

A wall-mounted 25kW hybrid inverter for three-phase sites: two MPP trackers spanning 200~850Vdc, 2+2 PV strings up to 1000Vdc, and a 160~700Vdc LFP (LiFePO4) battery port rated 50(A) in each direction.

Models Covered: IVGM25KHP3G3

Manufacturer: Felicity Solar

Application: The Felicity Solar IVGM25KHP3G3 is a 25kW three-phase hybrid inverter that delivers up to 27.5kVA of apparent power on a 3L+N+PE connection, tracks two MPPTs over a 200~850Vdc window, and charges or discharges a 160~700Vdc LFP (LiFePO4) battery at 50(A) in each direction. Each tracker takes two strings, 2+2 in total, with 30+30(A) of PV input current and 39+39(A) of short-circuit current under a 1000Vdc ceiling; the unit starts at 200Vdc, works from 150Vdc, is rated 600Vdc and holds full load between 666-850Vdc. On the AC side it is rated 36.3A and peaks at 39.8A at 220/380,230/400 Vac (-20%~+15%) and 50/60 Hz (45~55 Hz/55~65 Hz), with THDi below 3%, a power factor from 0.8 leading to 0.8 lagging and DC injection current under 0.5% In. The IP66 enclosure is wall-mounted, weighs 41.4KG net, measures 642*445*237.5MM and runs from -40 to 60°C with derating above 45°C in 0~95% non-condensing humidity, with WiFi/4G monitoring. We are an authorised Felicity Solar distributor and supply the IVGM25KHP3G3 from our own stock. Warranty: 2 Years.

Download PDF Datasheet Order now WhatsApp us

Models and prices

IVGM25KHP3G325 kWAED 2,420incl. VAT

Technical Specifications

Technical Specifications
Parameter	IVGM25KHP3G3
Battery Data
Supported Battery Type	LFP (LiFePO4)
Battery Voltage Range	160~700Vdc
Additional Specifications
Max. Charging Current	50(A)
Max. Discharging Current	50(A)
Max. DC Input Power	40kW
AC Wiring Mode	3L+N+PE
DC Injection Current	<0.5% In
PV String Input Data
Max PV Input Power	50kW
Max PV / DC Voltage	1000Vdc
Min DC Input Voltage	150Vdc
Start-up Voltage	200Vdc
Nominal DC Voltage	600Vdc
MPPT Voltage Range	200~850Vdc
MPPT Voltage Range at Full Load	666-850Vdc
Max PV Input Current	30+30(A)
Max PV Short-Circuit Current	39+39(A)
Strings per MPP Tracker	2+2
Electrical / AC Output Data
Rated AC Power	25kW
Max AC Apparent Power	27.5kVA
Rated AC Output Current	36.3A
Max AC Output Current	39.8A
Peak Power (with duration)	1.5times of
Nominal AC Voltage	220/380,230/400 Vac (-20%~+15%)
Grid / AC Frequency	50/60 Hz (45~55 Hz/55~65 Hz)
THD / THDi	<3%
Power Factor	0.8( leading) to 0.8( lagging)
Communication
Monitoring Module	WiFi/4G
Mechanical Data
Net Weight	41.4KG
Gross Weight	47.4KG
Dimensions (W×H×D)	642445237.5MM
Package Dimensions	784563367MM
Installation / Mounting	Wall-mounted
Protection Features
IP Rating	IP66
Operating Conditions
Operating Temperature	-40 to 60°C(>45°C Derating)
Relative Humidity	0~95% (No Condensation)

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in the UAE

Market	UAE
Grid authority / regulator	DEWA, ADDC, SEWA
Quotation currency	AED
Support hours timezone	Asia/Dubai
Main cities	Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

25kW rated AC power with up to 27.5kVA of apparent power on a 3L+N+PE three-phase connection
Two MPP trackers covering 200~850Vdc, holding full load from 666-850Vdc and starting at 200Vdc
2+2 PV strings drawing 30+30(A) of input current and 39+39(A) of short-circuit current at up to 1000Vdc
160~700Vdc LFP (LiFePO4) battery port charging and discharging at 50(A)
36.3A rated and 39.8A maximum AC current at 220/380,230/400 Vac (-20%~+15%) and 50/60 Hz, THDi below 3%
IP66 wall-mounted enclosure, 41.4KG net, 642*445*237.5MM, rated from -40 to 60°C

Frequently Asked Questions

What is the rated output power of the IVGM25KHP3G3?

25kW is the rated AC input/output power, and the inverter supplies up to 27.5kVA of apparent power. Rated AC current is 36.3A, rising to a maximum of 39.8A on a 3L+N+PE three-phase connection at 220/380,230/400 Vac (-20%~+15%).

Which batteries can I connect to the IVGM25KHP3G3?

160~700Vdc is the supported battery voltage range, and the supported chemistry is LFP (LiFePO4). Maximum charging current is 50(A) and maximum discharging current is 50(A) as well.

How many solar strings does the IVGM25KHP3G3 accept?

2+2 strings, two per MPP tracker, with 30+30(A) of PV input current and 39+39(A) of short-circuit current. Maximum PV voltage is 1000Vdc, the MPPT range is 200~850Vdc, start-up is at 200Vdc and full load is held between 666-850Vdc.

Can the IVGM25KHP3G3 be installed outdoors?

IP66 is the enclosure protection degree and the unit is wall-mounted, operating from -40 to 60°C with derating above 45°C and in 0~95% non-condensing humidity. Net weight is 41.4KG and the body measures 642*445*237.5MM.