Felicity Solar Hybrid Inverters 20 kW IVGM20KLP3G1
The Felicity Solar IVGM20KLP3G1 is a 20kW three-phase hybrid inverter rated 20kVA, peaking at 22kVA, with 97.6% maximum efficiency. It runs a 40-60V lead-acid or lithium battery bank and transfers to backup in 20ms.
Models and prices
- IVGM20KLP3G1AED 7,409incl. VAT
Technical Specifications
| Parameter | IVGM20KLP3G1 |
|---|---|
| Performance & Electrical | |
| AC Output Line Voltage | 380-400 V |
| AC Output Voltage | 220-230 V |
| AC Rated Output Current | 28.9 A |
| AC Wiring Mode | 3L+N+PE |
| Backup Rated Output Power | 20 kW |
| Battery Inputs | 2 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 40-60 V |
| Charge Algorithm | Self-Adaption to BMS |
| DC Switch | Yes |
| Grid Frequency Range (50 Hz) | 45-55 Hz |
| Grid Frequency Range (60 Hz) | 55-65 Hz |
| Grid Regulation | NRS 097-2-1, VDE4105, EN50549-1, AS 4777.2, GB/T 34120, GB/T 34133, GB/T 34129 |
| Ground Fault Current Monitoring | Yes |
| Input Voltage Range | 184-264.5 V |
| MPPT Full-Load Voltage Range | 550-800 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 160-650 V |
| Max AC Input Current | 31.9 A |
| Max AC Pass-Through Current | 70 A |
| Max Apparent Power | 22 kVA |
| Max Charging Current | 350 A |
| Max Discharging Current | 350 A |
| Max Efficiency | 97.6% |
| Max Output Current | 31.9 A |
| Max Output Overcurrent Protection | 92 A |
| Max PV Input Current | 36+36 A |
| Max PV Input Power | 32 kW |
| Max PV Voltage | 800 V |
| Max Short-Circuit Current | 54+54 A |
| Nominal AC Input Line Voltage | 380-400 V |
| Nominal AC Input Voltage | 220-230 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Overload Protection | Yes |
| Phase | Three Phase |
| Power Factor Adjustment Range | 0.8 leading to 0.8 lagging |
| Protection | DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (AFCI), Power Network Monitoring, Island Protection Monitoring, Earth Fault Detection, DC Input Switch, Overvoltage Load Drop Protection, Residual Current (RCD) Detection |
| Rated Apparent Output Power | 20 kVA |
| Rated Output Power | 20 kW |
| Rated PV Input Voltage | 550 V |
| Start-Up Voltage | 160 V |
| Strings per MPPT | 2+2 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 2*rated (10s) |
| Transfer Time | 20 ms |
| Build & Interfaces | |
| BMS Communication | RS485, CAN |
| Communication Interface | RS232, RS485 |
| Display | LCD Touch Screen |
| Gross Weight | 60.2 kg |
| Monitoring Module | WiFi/4G |
| Net Weight | 48.7 kg |
| Package Dimensions | 889 x 566 x 397 mm |
| Parallel Capability | 10 |
| Safety Standard | IEC/EN 62109-1, IEC/EN 62109-2 |
| Topology | Non-Isolated |
| Operating Environment | |
| Cooling | Smart Cooling |
| IP Rating | IP65 |
| Operating Temperature Range | -25 to 60 (>45 derating) °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 20kW rated output and 20kVA apparent power, peaking at 22kVA, on a 380-400V three-phase 3L+N+PE connection
- 97.6% maximum efficiency, with two MPPT trackers accepting up to 32kW of PV at up to 800V
- Two battery inputs for a 40-60V lead-acid or lithium bank, charging and discharging at up to 350A under RS485 or CAN BMS control
- 20ms transfer to backup, 70A AC pass-through and a surge of twice rated power for 10 seconds
- IP65 enclosure with smart cooling, an LCD touch screen and WiFi/4G monitoring, rated -25C to 60C
- Up to 10 units in parallel, built to IEC 62109-1, EN 62109-1, IEC 62109-2 and EN 62109-2
Frequently Asked Questions
What is the Felicity IVGM20KLP3G1?
The IVGM20KLP3G1 is a 20kW three-phase hybrid solar inverter from Felicity Solar. It is rated 20kVA apparent power with a 22kVA maximum, outputs 380-400V on a 3L+N+PE connection at 28.9A continuous and 31.9A maximum, reaches 97.6% peak efficiency and runs a 40-60V battery bank.
How much solar can the IVGM20KLP3G1 take?
Up to 32kW of PV. The IVGM20KLP3G1 has two MPPT trackers carrying two strings each, an MPPT window of 160-650V that narrows to 550-800V at full load, a rated PV input of 550V, a maximum PV voltage of 800V, 36+36A of input current and a 160V start-up voltage.
Which batteries work with the IVGM20KLP3G1?
Lead-acid or lithium-ion packs in the 40-60V range, on either of its two battery inputs. It charges and discharges at up to 350A, and its charge algorithm self-adapts to the pack BMS over RS485 or CAN, so a lithium bank is managed by its own battery management system.
Can the IVGM20KLP3G1 be installed outdoors, and how big is it?
Yes. The enclosure is rated IP65 with smart cooling and operates from -25C to 60C, derating above 45C. The unit measures 750 x 450 x 268mm and weighs 48.7kg net, 60.2kg gross in a 889 x 566 x 397mm carton, and up to 10 units can be paralleled on one site.