Felicity Solar Off-Grid Inverters 4.2 kW IVDM4224P1G3
Built around a 24V battery bank, the IVDM4224P1G3 gives 4.2kW and 4.2kVA at 230V, peaks at 4.26kVA, charges at 160A and tracks a single PV string from 60V upward.
Models and prices
- IVDM4224P1G3AED 2,470incl. VAT
Technical Specifications
| Parameter | IVDM4224P1G3 |
|---|---|
| Performance & Electrical | |
| AC Output Voltage | 230 V |
| AC Wiring Mode | L+N+PE |
| Backup Max Output Current | 20 A |
| Backup Rated Output Power | 4.2 kW |
| Battery Inputs | 1 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 20-30 V |
| Charge Algorithm | Self-Adaption to BMS |
| Ground Fault Current Monitoring | No |
| MPPT Full-Load Voltage Range | 300-425 V |
| MPPT Trackers | 1 |
| MPPT Voltage Range | 60-425 V |
| Max AC Input Current | 25 A |
| Max AC Output Power | 4.26 kW |
| Max AC Pass-Through Current | 25 A |
| Max Apparent Power | 4.26 kVA |
| Max Charging Current | 160 A |
| Max Discharging Current | 160 A |
| Max Efficiency | 97.6% |
| Max Output Current | 20 A |
| Max PV Access Power | 10 kW |
| Max PV Input Current | 20 A |
| Max PV Input Power | 8 kW |
| Max PV Voltage | 500 V |
| Max Short-Circuit Current | 27 A |
| Nominal AC Input Voltage | 230 V |
| Nominal DC Input Voltage | 24 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Output Voltage Waveform | Pure Sine Wave |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| PV Working Voltage Range | 60-500 V |
| Phase | Single Phase |
| Protection | DC Reverse Polarity Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, Overvoltage Load Drop Protection, DC Component Monitoring |
| Rated Apparent Output Power | 4.2 kVA |
| Rated Output Power | 4.2 kW |
| Rated PV Input Voltage | 370 V |
| Start-Up Voltage | 60 V |
| Strings per MPPT | 1 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 2*rated (10s) |
| Total Harmonic Distortion | <3% |
| Build & Interfaces | |
| BMS Communication | RS485, CAN |
| Communication Interface | RS485, CAN |
| Display | LCD, LED |
| Gross Weight | 10.3 kg |
| Monitoring Module | WiFi/LAN (optional) |
| Net Weight | 8.3 kg |
| Package Dimensions | 495 x 405 x 227 mm |
| Parallel Capability | 6 |
| Safety Standard | IEC/EN 62109-1, IEC/EN 62109-2 |
| Topology | Non-Isolated |
| Operating Environment | |
| Cooling | Intelligent Air Cooling |
| IP Rating | IP6X |
| Operating Temperature Range | -40 to 60 (>45 derating) °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 160A maximum charging and 160A maximum discharging on a 24V bank: One battery input with a 20-30V working range, lead-acid or Li-Ion, the charge algorithm self-adapting to the pack BMS over RS485 or CAN.
- 4.2kW rated output, 4.2kVA rated apparent and 4.26kVA peak apparent power: 20A of maximum output current at 230V single phase, alongside 4.26kW of maximum AC output power.
- Pure sine wave under 3% total harmonic distortion at 50/60Hz: Backup rated output power is 4.2kW at 20A of backup maximum output current, with twice rated power for 10 seconds.
- 8kW of maximum PV input power on a single MPPT tracker: 10kW of PV access power, one string at 20A with 27A of short-circuit current, under a 500V maximum PV voltage.
- 97.6% maximum efficiency, tracking from 60V to 425V: Full-load tracking is 300-425V, start-up is 60V, rated PV input voltage 370V and the PV working range 60-500V.
- IP6X enclosure of 403 x 313 x 137mm at 8.3kg net: Intelligent air cooling from -40°C to 60°C with derating above 45°C, a 495 x 405 x 227mm carton at 10.3kg gross, and six units in parallel.
Frequently Asked Questions
Which battery does the IVDM4224P1G3 need?
24V nominal on one battery input, working from 20V to 30V, lead-acid or Li-Ion, at up to 160A of charging current and 160A of discharging current. Its charge algorithm reads the pack BMS over RS485 or CAN and adapts to it.
What can the IVDM4224P1G3 run?
4.2kW of rated output power and 4.2kVA of rated apparent output power at 230V single phase, peaking at 4.26kVA of maximum apparent power and 4.26kW of maximum AC output power. Maximum output current is 20A on a pure sine wave under 3% total harmonic distortion, with twice rated power for 10 seconds.
How much solar fits the IVDM4224P1G3?
8kW of maximum PV input power on one MPPT tracker, with 10kW of PV access power, a single string carrying 20A and 27A of short-circuit current under 500V. Tracking runs 60-425V, or 300-425V at full load, from a 60V start-up voltage and a 370V rated PV input voltage.
Can the IVDM4224P1G3 pass an AC input through, and what does it weigh?
25A of maximum AC input current with 25A of AC pass-through current at a nominal 230V and 50/60Hz. The IP6X unit measures 403 x 313 x 137mm and weighs 8.3kg net, shipping in a 495 x 405 x 227mm carton at 10.3kg gross. The warranty is 2 Years.