Felicity Solar Off-Grid Inverters 8 kW IVAM8048P1G1
An 8kW off-grid inverter that takes twice its own AC rating in solar: the IVAM8048P1G1 accepts 16kW of PV across two MPPTs and moves 190A in or out of a 48V bank.
Models and prices
- IVAM8048P1G1AED 3,235incl. VAT
Technical Specifications
| Parameter | IVAM8048P1G1 |
|---|---|
| Performance & Electrical | |
| AC Output Voltage | 230 V |
| AC Wiring Mode | L+N+PE |
| Backup Rated Output Power | 8 kW |
| Battery Inputs | 1 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 40-60 V |
| Charge Algorithm | Self-Adaption to BMS |
| DC Switch | Yes |
| Ground Fault Current Monitoring | Yes |
| MPPT Full-Load Voltage Range | 200-425 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 90-425 V |
| Max AC Output Power | 8 kW |
| Max AC Pass-Through Current | 50 A |
| Max Charge/Discharge Power | 8 kW |
| Max Charging Current | 190 A |
| Max Discharging Current | 190 A |
| Max Efficiency | 97.6% |
| Max Output Current | 34.8 A |
| Max PV Input Current | 27+27 A |
| Max PV Input Power | 16 kW |
| Max PV Voltage | 500 V |
| Max Short-Circuit Current | 40+40 A |
| Nominal AC Input Voltage | 230 V |
| Nominal DC Input Voltage | 48 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Output Voltage Waveform | Pure Sine Wave |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| PV Working Voltage Range | 90-500 V |
| Phase | Single Phase |
| Protection | DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Power Network Monitoring, Earth Fault Detection, DC Input Switch, Overvoltage Load Drop Protection |
| Rated Apparent Output Power | 8 kVA |
| Rated Output Power | 8 kW |
| Rated PV Input Voltage | 370 V |
| Start-Up Voltage | 120 V |
| Strings per MPPT | 2+2 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 2*rated (10s) |
| Total Harmonic Distortion | <3% |
| Build & Interfaces | |
| BMS Communication | RS485, CAN |
| Communication Interface | RS485, CAN |
| Display | LCD, LED |
| Gross Weight | 25.4 kg |
| Monitoring Module | WiFi/LAN (optional) |
| Net Weight | 21.4 kg |
| Package Dimensions | 752 x 507 x 348 mm |
| Parallel Capability | 6 |
| Safety Standard | IEC/EN 62109-1, IEC/EN 62109-2 |
| Topology | Non-Isolated |
| Operating Environment | |
| Cooling | Intelligent Air Cooling |
| IP Rating | IP65 |
| Operating Temperature Range | -40 to 60 (>45 derating) °C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 16kW of PV input across two MPPT trackers: That is twice the 8kW AC rating, carried as 27+27A over 2+2 strings up to a 500V maximum PV voltage.
- 8kW rated and 8kVA rated apparent output at 230V: Single-phase pure sine wave under 3% total harmonic distortion at 50/60Hz, 34.8A maximum output current.
- 190A maximum charge and 190A maximum discharge: One battery input spanning 40-60V at 48V nominal, lead-acid or Li-Ion, at up to 8kW of charge and discharge power.
- 97.6% maximum efficiency over a 90-425V MPPT window: The window narrows to 200-425V at full load, from a 120V start-up voltage and a 370V rated PV input voltage.
- IP65 enclosure, 21.4kg net, rated -40°C to 60°C: The unit measures 594 x 385 x 203mm, cools on intelligent air cooling and derates above 45°C, with a DC switch and ground fault current monitoring.
- Up to six IVAM8048P1G1 units in parallel: RS485 and CAN carry BMS and system communication, beside an LCD and LED panel and an optional WiFi or LAN monitoring module.
Frequently Asked Questions
How much solar can the IVAM8048P1G1 take?
16kW of maximum PV input power, twice its own 8kW AC rating, across two MPPT trackers carrying 27+27A on 2+2 strings. Maximum PV voltage is 500V and rated PV input voltage is 370V, with tracking starting at 120V over a 90-425V window that narrows to 200-425V at full load.
Which battery does the IVAM8048P1G1 need?
48V nominal, over a 40-60V working range on a single battery input. Lead-acid and Li-Ion are both supported at up to 190A charge and 190A discharge, or 8kW of charge and discharge power, and the charge algorithm self-adapts to the pack BMS over RS485 or CAN.
What load can the IVAM8048P1G1 carry?
8kW rated output power and 8kVA rated apparent output power at 230V single phase, with 34.8A maximum output current on a pure sine wave under 3% THD. Surge capability is twice rated power for 10 seconds, backup rated output power is 8kW, and six units can run in parallel.
Can the IVAM8048P1G1 be mounted outdoors, and what does it weigh?
IP65, with an operating range of -40°C to 60°C and derating above 45°C on intelligent air cooling. The unit itself measures 594 x 385 x 203mm and weighs 21.4kg net, while the shipping carton is 752 x 507 x 348mm at 25.4kg gross. Warranty is 2 Years.