Felicity Solar Off-Grid Inverters 6 kW IVAM6048P1G1
The Felicity Solar IVAM6048P1G1 is a 6 kW single-phase off-grid solar inverter built around a 48 V battery bank, taking up to 9.6 kW of PV across two MPPT trackers. It peaks at 97.6% efficiency and charges or discharges at up to 135 A.
Models and prices
- IVAM6048P1G1AED 3,000incl. VAT
Technical Specifications
| Parameter | IVAM6048P1G1 |
|---|---|
| Performance & Electrical | |
| AC Output Voltage | 230 V |
| AC Wiring Mode | L+N+PE |
| Backup Rated Output Power | 6 kW |
| Battery Inputs | 1 |
| Battery Type | Lead-Acid, Li-Ion |
| Battery Voltage Range | 40-60 V |
| Charge Algorithm | Self-Adaption to BMS |
| DC Switch | Yes |
| European Efficiency | 96.5% |
| Ground Fault Current Monitoring | Yes |
| MPPT Efficiency | >99% |
| MPPT Full-Load Voltage Range | 300-425 V |
| MPPT Trackers | 2 |
| MPPT Voltage Range | 90-425 V |
| Max AC Output Power | 6 kW |
| Max AC Pass-Through Current | 35 A |
| Max Charge/Discharge Power | 6 kW |
| Max Charging Current | 135 A |
| Max Discharging Current | 135 A |
| Max Efficiency | 97.6% |
| Max Output Current | 26.1 A |
| Max PV Access Power | 12 kW |
| Max PV Input Current | 20+20 A |
| Max PV Input Power | 9.6 kW |
| Max PV Voltage | 500 V |
| Max Short-Circuit Current | 27+27 A |
| Nominal AC Input Voltage | 230 V |
| Nominal DC Input Voltage | 48 V |
| Nominal Input Frequency | 50/60 Hz |
| Output Frequency | 50/60 Hz |
| Output Short-Circuit Protection | Yes |
| Output Voltage Waveform | Pure Sine Wave |
| Overload Protection | Yes |
| Overvoltage Category (AC) | III |
| Overvoltage Category (DC) | II |
| PV Working Voltage Range | 90-500 V |
| Phase | Single Phase |
| Protection | DC Polarity Reverse Connection Protection, AC Output Overcurrent Protection, AC Output Overvoltage Protection, AC Output Short Circuit Protection, Thermal Protection, DC Terminal Insulation Impedance Monitoring, DC Component Monitoring, Ground Fault Current Monitoring, Arc Fault Circuit Interrupter (optional), Power Network Monitoring, Earth Fault Detection, DC Input Switch, Overvoltage Load Drop Protection |
| Rated Apparent Output Power | 6 kVA |
| Rated Output Power | 6 kW |
| Rated PV Input Voltage | 370 V |
| Start-Up Voltage | 120 V |
| Strings per MPPT | 2+2 |
| Surge Protection Level (AC) | II |
| Surge Protection Level (DC) | II |
| Surge Rating | 2*rated (10s) |
| Total Harmonic Distortion | <3% |
| Build & Interfaces | |
| BMS Communication | RS485, CAN |
| Communication Interface | RS485, CAN |
| Display | LCD, LED |
| Gross Weight | 15.4 kg |
| Monitoring Module | WiFi/LAN (optional) |
| Net Weight | 13.5 kg |
| Package Dimensions | 412 x 532 x 270 mm |
| Parallel Capability | 6 |
| Safety Standard | IEC/EN 62109-1, IEC/EN 62109-2 |
| Topology | Non-Isolated |
| Operating Environment | |
| Cooling | Intelligent Air Cooling |
| IP Rating | IP65 |
| Noise Level | <55 dB |
| Operating Altitude | 3000 m |
| Operating Temperature Range | -40 to 60 (>45 derating) °C |
| Relative Humidity | 0-100% |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 6 kW rated and 6 kVA apparent output at 230 V single phase, with 26.1 A maximum output current and twice rated power for 10 seconds
- Two MPPT trackers take 9.6 kW of PV input (12 kW array access) at up to 500 V, 20+20 A and 2+2 strings, tracking from 90 V to 425 V
- One 48 V battery input with a 40-60 V working range and 135 A maximum charge and discharge current, for lead-acid or Li-Ion packs
- 97.6% maximum efficiency, 96.5% European efficiency and MPPT efficiency above 99%
- Charge algorithm self-adapts to the battery BMS over RS485 or CAN, with LCD and LED display and optional WiFi/LAN monitoring
- IP65 enclosure, 13.5 kg net weight, 320 x 435 x 183.2 mm, intelligent air cooling and under 55 dB noise, with up to 6 units in parallel
Frequently Asked Questions
What is the Felicity Solar IVAM6048P1G1?
It is a 6 kW single-phase off-grid solar inverter for 48 V battery systems. It outputs 230 V at 50/60 Hz as a pure sine wave with under 3% total harmonic distortion, delivers up to 26.1 A, and sustains twice its rated power for 10 seconds.
How much solar can the IVAM6048P1G1 take?
Its two MPPT trackers accept up to 9.6 kW of PV input power and 12 kW of array access power at a maximum 500 V, with 2+2 strings and 20+20 A of input current. MPPT tracking runs from 90 V to 425 V, 300-425 V at full load, and the inverter starts up at 120 V.
Which batteries work with the IVAM6048P1G1?
It has one 48 V battery input with a 40-60 V operating window and supports both lead-acid and Li-Ion packs. Charge and discharge currents reach 135 A, and the charge algorithm self-adapts to the battery BMS over RS485 or CAN.
Can IVAM6048P1G1 units be paralleled, and where can it be installed?
Up to 6 units can run in parallel. The IP65 enclosure with intelligent air cooling operates from -40 to 60 C, derating above 45 C, at altitudes to 3000 m and under 55 dB of noise. It weighs 13.5 kg net and measures 320 x 435 x 183.2 mm.