Felicity Solar Lithium Batteries FLS48100SG1

A 100 Ah LiFePO4 battery module rated 60 A continuous and 100 A peak for 15 s, expandable from one to eight units sharing a single 51.2 V bus.

Models Covered: FLS48100SG1

Manufacturer: Felicity Solar

Application: The Felicity Solar FLS48100SG1 is a 51.2 V LiFePO4 battery module holding 5.12 kWh, or 100 Ah, rated for 60 A continuous charge and discharge with a 100 A peak for 15 s. One to eight modules run in parallel, taking a bank to 40.96 kWh on the same 51.2 V bus. The cells are rated beyond 6000 cycles, with depth of discharge rated separately at ≥95%. The operating window runs 44.8 V to 57.6 V, with cut-off at 44.8 V, a charging ceiling of 57.6 V and 50 A as the recommended everyday current. A built-in smart BMS works with a breaker and a fuse; the control module carries an LCD and the battery module 4 LEDs, with CAN and RS485 ports for monitoring. The module measures 600 x 450 x 180 mm, weighs 46 kg, stands on the floor and travels in a 712 x 562 x 298 mm carton at 50 kg gross. Charge from 0 to 55 °C, discharge from -20 to 55 °C, 5-95% humidity, below 2000 m, rated IP21, stored at 0-35 °C. We are an authorised Felicity Solar distributor and supply the FLS48100SG1 from our own stock. Warranty: 5 Years.

Models and prices

Technical Specifications

Technical Specifications
ParameterFLS48100SG1
Performance & Electrical
Battery TypeLiFePO4
Cut-Off Voltage44.8 V
Cycle Life>6000
Depth of Discharge≥95%
Max Charging Voltage57.6 V
Max Continuous Charge/Discharge Current60 A
Max Parallel Units8
Max System Capacity40.96 kWh
Module Nominal Capacity100 Ah
Module Nominal Energy5.12 kWh
Module Nominal Voltage51.2 V
Nominal Capacity100 Ah
Nominal Energy5.12 kWh
Nominal Voltage51.2 V
Operating Voltage44.8-57.6 V
Peak Charge/Discharge Current (15 s)100 A
ProtectionBuilt-in Smart BMS, Breaker, Fuse
Recommended Charge/Discharge Current50 A
System Nominal Energy5.12-40.96 kWh
System Nominal Voltage51.2 V
System Operating Voltage44.8-57.6 V
Build & Interfaces
Battery Modules1-8
CommunicationCAN, RS485
Control Module Dimensions600 x 450 x 180 mm
Control Module Weight46 kg
Display TypeControl Module: LCD, Battery Module: LED*4
InstallationFloor-Mounted
Module Dimensions600 x 450 x 180 mm
Module Weight46 kg
Package Dimensions712 x 562 x 298 mm
Package Weight50 kg
Operating Environment
Charging Temperature Range0-55 °C
Discharging Temperature Range-20 to 55 °C
Humidity Range5-95%
Operating Altitude<2000 m
Protection DegreeIP21
Storage Temperature Range0-35 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in the UAE

MarketUAE
Grid authority / regulatorDEWA, ADDC, SEWA
Quotation currencyAED
Support hours timezoneAsia/Dubai
Main citiesDubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

  • 5.12 kWh of LiFePO4 storage, 100 Ah at 51.2 V nominal, with a depth of discharge of ≥95%
  • 60 A continuous charge and discharge, peaking at 100 A for 15 s, 50 A recommended for daily use
  • One to eight modules in parallel, taking a bank from 5.12 kWh to 40.96 kWh on one 51.2 V bus
  • Cells rated beyond 6000 cycles inside a 44.8 V to 57.6 V window, with cut-off at 44.8 V
  • Built-in smart BMS with breaker and fuse, an LCD control module, 4 LEDs per battery module and CAN and RS485 ports
  • 46 kg floor-mounted module of 600 x 450 x 180 mm, rated IP21, charging from 0 to 55 °C

Frequently Asked Questions

How much energy does the FLS48100SG1 store?

5.12 kWh, which is 100 Ah at a nominal 51.2 V. A depth of discharge of ≥95% leaves nearly all of it usable, and eight modules in parallel take a bank to 40.96 kWh.

What current can the FLS48100SG1 charge and discharge at?

60 A continuously, in either direction, with a 100 A peak for 15 s. The recommended everyday current is 50 A, inside an operating window of 44.8 V to 57.6 V with cut-off at 44.8 V.

How many FLS48100SG1 modules can run in parallel?

8 modules. The bank scales from one module at 5.12 kWh to eight at 40.96 kWh, all on the same 51.2 V nominal bus, with CAN and RS485 for communication.

How much does the FLS48100SG1 weigh and what warranty does it carry?

46 kg for a floor-mounted module of 600 x 450 x 180 mm. It ships in a 712 x 562 x 298 mm carton at 50 kg gross, is rated IP21, and the warranty is 5 Years.