Felicity Solar Lithium Batteries FLH96050SG1

Q: What is the Felicity Solar FLH96050SG1 and how much energy does it store?

The FLH96050SG1 is a 102.4 V, 50 Ah LiFePO4 battery module holding 5.12 kWh. It is built to stack: two to six modules sit on one control module to form a 10.24 kWh to 30.72 kWh high-voltage battery, and up to 16 of those towers can be paralleled for 491.52 kWh.

Q: What voltage does an FLH96050SG1 stack run at?

One module is 102.4 V nominal with a 96-115.2 V operating window. A finished stack is 204.8-614.4 V nominal, operates between 192 V and 691.2 V, takes a maximum charging voltage of 230.4-691.2 V and cuts off at 192-576 V. It must be paired with a hybrid inverter rated for that battery input range.

Q: How long does the FLH96050SG1 last, and what warranty period does it carry?

Cycle life is rated above 6000 cycles, with depth of discharge rated separately at ≥95%, and the warranty period is 10 years. The optimal operating temperature is 20-30 °C; charging is allowed from 0 °C to 55 °C and discharging from -20 °C to 55 °C, in 5-95% humidity and below 2000 m altitude.

Q: How is the FLH96050SG1 installed and how much does it weigh?

It is stack-mounted or floor-mounted. Each module weighs 57.5 kg and measures 600 x 385 x 260 mm; the control module is 12.5 kg at 600 x 385 x 200 mm, and the packed module ships at 62 kg in a 712 x 497 x 378 mm carton. The IP65 enclosure, touch LCD and CAN/RS485 links complete the install.

The Felicity Solar FLH96050SG1 is a 5.12 kWh, 102.4 V / 50 Ah LiFePO4 module that stacks two to six high for 10.24-30.72 kWh of high-voltage storage. It is rated above 6000 cycles, with depth of discharge rated separately at ≥95%, with a 10-year warranty period.

Models Covered: FLH96050SG1

Manufacturer: Shenzhen Felicity Solar Technology Co., Ltd.

Application: The Felicity Solar FLH96050SG1 is a 5.12 kWh high-voltage LiFePO4 battery module rated 102.4 V and 50 Ah, built to stack two to six modules on one control module for 10.24 kWh to 30.72 kWh of storage at a depth of discharge of ≥95%. Each module weighs 57.5 kg and measures 600 x 385 x 260 mm; the control module adds 12.5 kg in a 600 x 385 x 200 mm case. A module runs 96-115.2 V and a finished stack 192-691.2 V, for a nominal 204.8-614.4 V, so the tower must be matched to a hybrid inverter whose battery input covers that window. Continuous charge and discharge current is 50 A, with a 60 A peak for 15 seconds and 25 A recommended in normal use. A built-in smart BMS and breaker protect the pack, a touch LCD and LED report status, and CAN and RS485 carry data to the inverter. Cycle life is rated above 6000 cycles, the enclosure is IP65, and discharge is permitted from -20 °C to 55 °C. Up to 16 towers run in parallel for 491.52 kWh. The warranty period is 10 years. We are an authorised Felicity Solar distributor and supply the FLH96050SG1 from our own stock.

Download PDF Datasheet Order now WhatsApp us

Models and prices

FLH96050SG15.12 kWhAED 6,144incl. VAT

Technical Specifications

Technical Specifications
Parameter	FLH96050SG1
Performance & Electrical
Battery Type	LiFePO4
Cut-Off Voltage	192-576 V
Cycle Life	>6000
Depth of Discharge	≥95%
Max Charging Voltage	230.4-691.2 V
Max Continuous Charge/Discharge Current	50 A
Max Parallel Units	16
Max System Capacity	491.52 kWh
Module Nominal Capacity	50 Ah
Module Nominal Energy	5.12 kWh
Module Nominal Voltage	102.4 V
Nominal Capacity	50 Ah
Nominal Energy	5.12 kWh
Nominal Voltage	102.4 V
Operating Voltage	96-115.2 V
Peak Charge/Discharge Current (15 s)	60 A
Protection	Built-in Smart BMS, Breaker
Recommended Charge/Discharge Current	25 A
System Nominal Energy	10.24-30.72 kWh
System Nominal Voltage	204.8-614.4 V
System Operating Voltage	192-691.2 V
Build & Interfaces
Battery Modules	2-6
Communication	CAN, RS485
Control Module Dimensions	600 x 385 x 200 mm
Control Module Weight	12.5 kg
Display Type	LCD (Touch), LED
Installation	Stack-Mounted, Floor-Mounted
Module Dimensions	600 x 385 x 260 mm
Module Weight	57.5 kg
Package Dimensions	712 x 497 x 378 mm
Package Weight	62 kg
Operating Environment
Charging Temperature Range	0-55 °C
Discharging Temperature Range	-20 to 55 °C
Humidity Range	5-95%
Operating Altitude	<2000 m
Optimal Operating Temperature	20-30 °C
Protection Degree	IP65
Storage Temperature Range	0-35 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Configurations & shipping weights

Configuration	Weight	Dimensions (W × D × H)
FLH96050SMG1 — 10.24 kWh (2 × 5.12 kWh modules)	127.5 kg	—
FLH96050SMG1 — 15.36 kWh (3 × 5.12 kWh modules)	185 kg	—
FLH96050SMG1 — 20.48 kWh (4 × 5.12 kWh modules)	242.5 kg	—
FLH96050SMG1 — 25.6 kWh (5 × 5.12 kWh modules)	300 kg	—
FLH96050SMG1 — 30.72 kWh (6 × 5.12 kWh modules)	357.5 kg	—

This listing covers several shippable configurations. Each row is the manufacturer’s stated figure for that build; the page weight above is the smallest one, which is what a single unit ships at.

Availability & grid compliance in the UAE

Market	UAE
Grid authority / regulator	DEWA, ADDC, SEWA
Quotation currency	AED
Support hours timezone	Asia/Dubai
Main cities	Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

5.12 kWh per module at 102.4 V nominal and 50 Ah, stacking 2 to 6 modules for 10.24-30.72 kWh
Cycle life rated above 6000 cycles, with depth of discharge rated separately at ≥95%, with a 10-year warranty period
50 A continuous charge and discharge, 60 A peak for 15 seconds, 25 A recommended working current
Built-in smart BMS and breaker, touch LCD plus LED display, CAN and RS485 communication
IP65 enclosure, discharging from -20 °C to 55 °C, charging 0-55 °C, optimal 20-30 °C
57.5 kg module at 600 x 385 x 260 mm; up to 16 towers in parallel for 491.52 kWh

Frequently Asked Questions

What is the Felicity Solar FLH96050SG1 and how much energy does it store?

The FLH96050SG1 is a 102.4 V, 50 Ah LiFePO4 battery module holding 5.12 kWh. It is built to stack: two to six modules sit on one control module to form a 10.24 kWh to 30.72 kWh high-voltage battery, and up to 16 of those towers can be paralleled for 491.52 kWh.

What voltage does an FLH96050SG1 stack run at?

One module is 102.4 V nominal with a 96-115.2 V operating window. A finished stack is 204.8-614.4 V nominal, operates between 192 V and 691.2 V, takes a maximum charging voltage of 230.4-691.2 V and cuts off at 192-576 V. It must be paired with a hybrid inverter rated for that battery input range.

How long does the FLH96050SG1 last, and what warranty period does it carry?

Cycle life is rated above 6000 cycles, with depth of discharge rated separately at ≥95%, and the warranty period is 10 years. The optimal operating temperature is 20-30 °C; charging is allowed from 0 °C to 55 °C and discharging from -20 °C to 55 °C, in 5-95% humidity and below 2000 m altitude.

How is the FLH96050SG1 installed and how much does it weigh?

It is stack-mounted or floor-mounted. Each module weighs 57.5 kg and measures 600 x 385 x 260 mm; the control module is 12.5 kg at 600 x 385 x 200 mm, and the packed module ships at 62 kg in a 712 x 497 x 378 mm carton. The IP65 enclosure, touch LCD and CAN/RS485 links complete the install.