Felicity Solar Lithium Batteries FLB24100/FLB24205/FLB24230WG1

Q: How much energy does the FLB24100WG1 store?

2.56 kWh of nominal energy, from a 25.6 V, 100 Ah LiFePO4 stack. The depth of discharge is ≥95%, so nearly all of that is usable each cycle, and the module is rated for more than 6000 cycles.

Q: What are the FLB24100WG1 dimensions and weight?

540 x 150 x 375 mm and 29.3 kg for the battery itself. Packed for shipping it measures 642 x 253 x 477 mm and weighs 32.9 kg, so plan handling on the 32.9 kg carton and wall fixings on the 29.3 kg unit.

Q: How many FLB24100WG1 batteries can be connected in parallel?

32 units, giving a maximum system capacity of 81.92 kWh. They coordinate over CAN or RS485, and each unit carries its own built-in smart BMS, breaker and fuse.

Q: What charge and discharge current does the FLB24100WG1 support?

100 A continuously, with a 150 A peak for 15 seconds and 50 A recommended for everyday operation. The voltage window is 22.4-28.8 V, with cut-off at 22.4 V and a maximum charging voltage of 28.8 V.

Q: How much energy does the FLB24205WG1 store?

5.25 kWh, which is 205 Ah at a 25.6 V nominal bus, with a depth of discharge of at least 95% and a cycle life rated at more than 6000 cycles.

Q: How many FLB24205WG1 batteries can I put in parallel?

32 units, which builds a 168 kWh bank. Each module carries its own smart BMS, breaker and fuse, and reports over CAN and RS485 to a compatible inverter.

Q: What charge and discharge current does the FLB24205WG1 take?

150 A continuously, with a 200 A peak and 100 A recommended. It charges between 0 and 55 °C and discharges from -20 to 55 °C.

Q: How much does the FLB24205WG1 weigh and how big is the carton?

51 kg is the module itself; the carton takes it to 56 kg gross and measures 642 x 340 x 477 mm. The IP65 enclosure mounts on a wall or stands on the floor.

Q: How much energy does the Felicity FLB24230WG1 store?

5.85 kWh of nominal energy, drawn from 230 Ah of LiFePO4 capacity at a nominal 25.6 V. The module operates between 22.4 V and 28.8 V, cuts off at 22.4 V and supports a depth of discharge of ≥95%.

Q: How many FLB24230WG1 units can be wired in parallel?

32 units, giving a maximum system capacity of 188.8 kWh. Each unit charges and discharges at 150 A continuously and peaks at 200 A for 15 seconds, and CAN and RS485 ports carry the communication between them.

A 2.56 kWh LiFePO4 module measuring 540 x 150 x 375 mm, with a built-in smart BMS, an LED status display and CAN and RS485 ports, wall-mounted or floor-mounted.

Models Covered: FLB24100WG1, FLB24205WG1, FLB24230WG1

Manufacturer: Felicity Solar

Application: The Felicity Solar FLB24100WG1 is a 25.6 V, 100 Ah LiFePO4 battery module holding 2.56 kWh of nominal energy and rated for more than 6000 cycles, with depth of discharge rated separately at ≥95%. It weighs 29.3 kg, measures 540 x 150 x 375 mm and sits in an IP65 enclosure. Charge and discharge run to 100 A continuously, with a 150 A peak for 15 seconds, while 50 A is the recommended everyday current. The working window is 22.4-28.8 V, cutting off at 22.4 V and topping out at a 28.8 V charging voltage. Up to 32 FLB24100WG1 units run in parallel for a maximum system capacity of 81.92 kWh, coordinated over CAN or RS485. A built-in smart BMS, a breaker and a fuse handle protection, an LED display reports state, and the module mounts on a wall or stands on the floor. It charges between 0 and 55 °C and discharges from -20 to 55 °C, in 5-95% humidity below 2000 m. Warranty: 5 Years. We are an authorised Felicity Solar distributor and supply the FLB24100WG1 from our own stock.

Download PDF Datasheet Order now WhatsApp us

Models and prices

FLB24100WG12.56 kWhAED 2,550incl. VAT
FLB24205WG15.25 kWhAED 2,825incl. VAT
FLB24230WG15.85 kWhAED 3,500incl. VAT

Technical Specifications

Technical Specifications
Parameter	FLB24100WG1	FLB24205WG1	FLB24230WG1
Performance & Electrical
Battery Type	LiFePO4
Cut-Off Voltage	22.4 V
Cycle Life	>6000
Depth of Discharge	≥95%
Max Charging Voltage	28.8 V
Max Continuous Charge/Discharge Current	100 A	150 A	150 A
Max Parallel Units	32
Max System Capacity	81.92 kWh	168 kWh	188.8 kWh
Nominal Capacity	100 Ah	205 Ah	230 Ah
Nominal Energy	2.56 kWh	5.25 kWh	5.85 kWh
Nominal Voltage	25.6 V
Operating Voltage	22.4-28.8 V
Peak Charge/Discharge Current (15 s)	150 A	200 A	200 A
Protection	Built-in Smart BMS, Breaker, Fuse
Recommended Charge/Discharge Current	50 A	100 A	100 A
Build & Interfaces
Communication	CAN, RS485
Display Type	LED
Installation	Wall-Mounted, Floor-Mounted
Package Dimensions	642 x 253 x 477 mm	642 x 340 x 477 mm	642 x 340 x 477 mm
Package Weight	32.9 kg	56 kg	58 kg
Operating Environment
Charging Temperature Range	0-55 °C
Discharging Temperature Range	-20 to 55 °C
Humidity Range	5-95%
Operating Altitude	<2000 m
Protection Degree	IP65
Storage Temperature Range	0-35 °C

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Configurations & shipping weights

Configuration	Weight	Dimensions (W × D × H)
FLB24100WG1 — 2.56 kWh (100 Ah)	29.3 kg	540 × 375 × 150 mm
FLB24205WG1 — 5.25 kWh (205 Ah)	51 kg	540 × 375 × 261 mm
FLB24230WG1 — 5.85 kWh (230 Ah)	53 kg	540 × 375 × 261 mm

This listing covers several shippable configurations. Each row is the manufacturer’s stated figure for that build; the page weight above is the smallest one, which is what a single unit ships at.

Availability & grid compliance in the UAE

Market	UAE
Grid authority / regulator	DEWA, ADDC, SEWA
Quotation currency	AED
Support hours timezone	Asia/Dubai
Main cities	Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

2.56 kWh of nominal energy from a 25.6 V, 100 Ah LiFePO4 cell stack
Rated for more than 6000 cycles, with depth of discharge rated separately at ≥95%
100 A continuous charge and discharge, with a 150 A peak for 15 seconds
Up to 32 units in parallel for a maximum system capacity of 81.92 kWh
29.3 kg in a 540 x 150 x 375 mm IP65 case, wall-mounted or floor-mounted
CAN and RS485 communication with a built-in smart BMS, breaker and fuse
5.25 kWh of nominal LiFePO4 energy: 205 Ah on a 25.6 V nominal bus
Scales to a 168 kWh bank with up to 32 units wired in parallel
150 A continuous charge and discharge, 200 A peak, 100 A recommended
Works across a 22.4-28.8 V window, charging to 28.8 V and cutting off at 22.4 V
More than 6000 cycles, with ≥95% depth of discharge, warranty 5 Years
51 kg IP65 enclosure, wall- or floor-mounted, with CAN, RS485 and an LED display

Frequently Asked Questions

How much energy does the FLB24100WG1 store?

2.56 kWh of nominal energy, from a 25.6 V, 100 Ah LiFePO4 stack. The depth of discharge is ≥95%, so nearly all of that is usable each cycle, and the module is rated for more than 6000 cycles.

What are the FLB24100WG1 dimensions and weight?

540 x 150 x 375 mm and 29.3 kg for the battery itself. Packed for shipping it measures 642 x 253 x 477 mm and weighs 32.9 kg, so plan handling on the 32.9 kg carton and wall fixings on the 29.3 kg unit.

How many FLB24100WG1 batteries can be connected in parallel?

32 units, giving a maximum system capacity of 81.92 kWh. They coordinate over CAN or RS485, and each unit carries its own built-in smart BMS, breaker and fuse.

What charge and discharge current does the FLB24100WG1 support?

100 A continuously, with a 150 A peak for 15 seconds and 50 A recommended for everyday operation. The voltage window is 22.4-28.8 V, with cut-off at 22.4 V and a maximum charging voltage of 28.8 V.

How much energy does the FLB24205WG1 store?

5.25 kWh, which is 205 Ah at a 25.6 V nominal bus, with a depth of discharge of at least 95% and a cycle life rated at more than 6000 cycles.

How many FLB24205WG1 batteries can I put in parallel?

32 units, which builds a 168 kWh bank. Each module carries its own smart BMS, breaker and fuse, and reports over CAN and RS485 to a compatible inverter.

What charge and discharge current does the FLB24205WG1 take?

150 A continuously, with a 200 A peak and 100 A recommended. It charges between 0 and 55 °C and discharges from -20 to 55 °C.

How much does the FLB24205WG1 weigh and how big is the carton?

51 kg is the module itself; the carton takes it to 56 kg gross and measures 642 x 340 x 477 mm. The IP65 enclosure mounts on a wall or stands on the floor.

How much energy does the Felicity FLB24230WG1 store?

5.85 kWh of nominal energy, drawn from 230 Ah of LiFePO4 capacity at a nominal 25.6 V. The module operates between 22.4 V and 28.8 V, cuts off at 22.4 V and supports a depth of discharge of ≥95%.

How many FLB24230WG1 units can be wired in parallel?

32 units, giving a maximum system capacity of 188.8 kWh. Each unit charges and discharges at 150 A continuously and peaks at 200 A for 15 seconds, and CAN and RS485 ports carry the communication between them.