Felicity Solar Lithium Batteries FLA48206WG1-EU
A 51.2V LiFePO4 battery of 10.5kWh nominal energy, the FLA48206WG1-EU peaks at 8200W in both directions over 15 seconds and parallels to 15 units for 157.5kWh.
Models and prices
- FLA48206WG1-EUAED 1,530incl. VAT
Technical Specifications
| Parameter | FLA48206WG1-EU |
|---|---|
| Battery Data | |
| Battery Type / Chemistry | LiFePO4 |
| Scalability / Max Expandable Capacity | Max. 15 pcs in Parallel(157.5kWh) |
| Depth of Discharge | ≥95% |
| Additional Specifications | |
| Nominal Energy | 10.5kWh |
| Electrical / AC Output Data | |
| Nominal Voltage | 51.2V |
| Operating Voltage Range | 44.8-57.6V |
| Peak / Surge Power (W) | Charge 8200W Discharge 8200W |
| Communication | |
| Communication Interface | CAN2.0/RS485/WIFI/Bluetooth |
| Protection Features | |
| Protection Features | BMS, Fuse, Breaker, MX+OF |
| IP Rating | IP21 |
| Mechanical Data | |
| Weight | 87KG |
| Gross Weight | 98KG |
| Dimensions (W×H×D) | 787X450X249MM |
| Package Dimensions | 900X568X344MM |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 10.5kWh of nominal energy on a 51.2V nominal bus, inside a 44.8-57.6V operating window
- 8200W charge and 8200W discharge, the maximum power measured over a 15-second peak
- Up to 15 FLA48206WG1-EU units in parallel for 157.5kWh on a single bank
- Depth of discharge specified at ≥95%, which governs how much of the 10.5kWh nominal is drawn
- CAN2.0, RS485, WIFI and Bluetooth communication, with BMS, fuse, breaker and MX+OF protection
- 87KG unit measuring 787X450X249MM behind an IP21 enclosure, with a 5 Years warranty
Frequently Asked Questions
How much energy does the FLA48206WG1-EU store?
10.5kWh of nominal energy at a 51.2V nominal voltage. That is nominal, not usable: depth of discharge is specified separately at ≥95%, and it is that figure which governs how much of the 10.5kWh comes back out. The FLA48206WG1-EU operating window runs 44.8-57.6V.
What is the peak charge and discharge power of the FLA48206WG1-EU?
8200W charge and 8200W discharge, measured over a 15-second peak on the 51.2V nominal bus. That pairing is specific to the FLA48206WG1-EU rather than shared across the wider 51.2V line-up.
How many FLA48206WG1-EU units can run in parallel?
15 units in parallel, for 157.5kWh in one bank. Each unit adds 10.5kWh, weighs 87KG and occupies 787X450X249MM, so the floor loading and the run of the bus can be planned from the number of units before they arrive.
What warranty and protection does the FLA48206WG1-EU carry?
5 Years. Protection is built from a BMS, a fuse, a breaker and MX+OF, the enclosure is rated IP21, and monitoring runs over CAN2.0, RS485, WIFI and Bluetooth from the same unit.