Felicity Solar Lithium Batteries FLA24300WG2

A 64 kg LiFePO4 cabinet storing 7.5kWh, governed by BMS version S515 with a built-in fuse, drawing 175A*N on charge and ganging to 15 units for a 112.5kWh bank.

Models Covered: FLA24300WG2

Manufacturer: Shenzhen Felicity Solar Technology Co., Ltd.

Application: The FLA24300WG2 is Felicity Solar's 7.5kWh LiFePO4 battery, a 25.6V nominal pack that sustains 4480W of continuous charge or discharge, absorbs a 300A peak current and is rated for ≥ 6000 Cycles, with a depth of discharge of ≥95%. The cabinet weighs 64 kg and measures 400 x 269 x 475 mm. Behind the panel, BMS version S515 supervises the cells with a built-in smart BMS and a fuse, holding a 24V cut-off voltage, a 28.8V floating charging voltage and a 28.8V maximum charging voltage inside a 22.4-28.8V operating window, while an LCD+LED display reports the pack state on the spot. CAN and RS485 carry that data to a compatible inverter. Fifteen of these cabinets gang in parallel for 112.5kWh at a maximum charging current of 175A*N, or 100A of continuous current each. Shipping cartons measure 512x547×343mm. Charging runs 0-55°C, discharging -20-55°C, working -20°C to +55°C and storage 0°C to +35°C, with 5% to 95% humidity and ≤2000m of elevation. Certifications are UN38.3, CE-EMC and IEC 62619. We are the authorised Felicity Solar distributor for this 7.5kWh model and supply it with a warranty of 2 Years.

Models and prices

Technical Specifications

Technical Specifications
ParameterFLA24300WG2
Electrical Characteristics
CertificationUN38.3, CE-EMC IEC 62619
Max.Charge/Discharge Power4480W
Peak Charge/Discharge Current(15s)300A
ProtectionBuilt-in Smart BMS, Fuse
ScalabilityUp to 15 units in parallel(112.5kWh)
Cycle Life≥ 6000 Cycles
Energy7.5kWh
Max. Charging Current175A*N
Additional Specifications
Depth of Discharge(DOD)≥95%
Cut-off Voltage24V
Floating Charging Voltage28.8V
Max. Charging Voltage28.8V
Operating Voltage22.4-28.8V
DisplayLCD+LED
InstallationWall-Mounted / Floor-Mounted
Electrical Data
Max.Continuous Charge/Discharge Current175A
General Specifications
Battery TypeLiFePO4
Nominal Voltage25.6V
Energy Capacity7.5kWh
Battery Specifications
Capacity112.5kWh
BMS Specifications
BMS VersionS515
Communication
Communication InterfaceCAN/RS485
Mechanical Data
Package Dimension512x547×343mm
Operating Conditions
Charging Temperature Range0-55°C
Discharging Temperature Range-20-55°C
Working Temperature-20°C to +55°C
Storage Temperature0°C to +35°C
Relative Humidity5% to 95%
Elevation≤2000m
Protection Features
Over Voltage ProtectionYes
Over Current ProtectionYes

Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.

Availability & grid compliance in the UAE

MarketUAE
Grid authority / regulatorDEWA, ADDC, SEWA
Quotation currencyAED
Support hours timezoneAsia/Dubai
Main citiesDubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah

Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.

For prices, see Felicity Solar Systems: Prices in UAE. Store pickup — collect your order from our store in Dubai or Riyadh.

Key Features & Technical Highlights

  • 7.5kWh in one 25.6V cabinet: A single FLA24300WG2 stores 7.5kWh of LiFePO4 energy at 25.6V nominal, usable to a depth of discharge of ≥95%.
  • 4480W continuous, 300A peak: The pack sustains 4480W of charge or discharge power at 100A continuous, and absorbs a 300A peak current.
  • Rated for ≥ 6000 Cycles: Cells are rated for ≥ 6000 Cycles and work across a 22.4-28.8V operating voltage range with a 24V cut-off voltage.
  • BMS version S515 plus a fuse: A built-in smart BMS on version S515 holds 28.8V as both the floating and maximum charging voltage, with an LCD+LED display.
  • Up to 15 units for 112.5kWh: Up to 15 units in parallel reach 112.5kWh of storage at a maximum charging current of 175A*N, linked over CAN and RS485.
  • 64 kg, -20°C to +55°C service: The 64 kg, 400 x 269 x 475 mm cabinet mounts on a wall or floor, works from -20°C to +55°C and ships in a 512x547×343mm carton.

Frequently Asked Questions

How much energy does the FLA24300WG2 store, and at what voltage?

7.5kWh at 25.6V nominal, usable to a depth of discharge of ≥95% inside a 22.4-28.8V operating window. The chemistry is LiFePO4 and the cells are rated for ≥ 6000 Cycles.

What power and current can the FLA24300WG2 handle?

4480W of continuous charge or discharge power, at 100A of continuous current and a 300A peak. A built-in smart BMS and a fuse hold a 24V cut-off voltage and a 28.8V maximum charging voltage.

What are the dimensions and weight of the FLA24300WG2?

400 x 269 x 475 mm and 64 kg, shipped in a 512x547×343mm carton. The cabinet is wall-mounted or floor-mounted and carries an LCD+LED display on the front.

How many FLA24300WG2 units can run in parallel?

15 units in parallel is the ceiling, giving 112.5kWh of storage at a maximum charging current of 175A*N. Units talk over CAN and RS485, all on BMS version S515.