Felicity Solar Lithium Batteries FLA24200 / FLA24300 / FLA24500
200 Ah at 25.6 V behind a 22.4-28.8 V window, recommended at 120 A, with a 3750 W burst and a wall or floor mounting for its 39 kg case.
Models and prices
Technical Specifications
| Parameter | FLA24200 | FLA24300 | FLA24500 |
|---|---|---|---|
| Performance & Electrical | |||
| Battery Type | LiFePO4 | ||
| Cut-Off Voltage | 22.4 V | ||
| Cycle Life | ≥6000 | ||
| Depth of Discharge | ≥95% | ||
| Max Charge/Discharge Power (15 s) | 3750 W | 5000 W | 7500 W |
| Max Charging Voltage | 28.8 V | ||
| Max Parallel Units | 15 | ||
| Max System Capacity | 75 kWh | 112.5 kWh | 187.5 kWh |
| Nominal Capacity | 200 Ah | 300 Ah | 500 Ah |
| Nominal Energy | 5 kWh | 7.5 kWh | 12.5 kWh |
| Nominal Voltage | 25.6 V | ||
| Operating Voltage | 22.4-28.8 V | ||
| Peak Charge/Discharge Current (15 s) | 150 A | 200 A | 300 A |
| Protection | Built-in Smart BMS, Breaker, Fuse | ||
| Recommended Charge/Discharge Current | 120 A | 150 A | 200 A |
| Recommended Charge/Discharge Power | 3000 W | 3750 W | 5000 W |
| Build & Interfaces | |||
| Communication | CAN, RS485 | ||
| Display Type | LCD, LED | ||
| Installation | Wall-Mounted, Floor-Mounted | ||
| Package Dimensions | 600 x 282 x 555 mm | 780 x 427 x 550 mm | 900 x 450 x 525 mm |
| Package Weight | 44 kg | 90 kg | 113 kg |
| Operating Environment | |||
| Charging Temperature Range | 0-55 °C | ||
| Discharging Temperature Range | -20 to 55 °C | ||
| Protection Degree | IP21 | ||
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 200 Ah of nominal capacity — 5 kWh — on a 25.6 V bus with a 22.4-28.8 V window
- 120 A recommended continuous current, with 3000 W of recommended power
- 3750 W and 150 A of peak charge and discharge, each rated over 15 seconds
- 15 units in parallel reach a maximum system capacity of 75 kWh
- At least 6000 cycles of life, and a depth of discharge listed separately at ≥95%
- 39 kg battery at 482 × 194 × 433 mm, wall or floor mounted at IP21; 44 kg packed at 600 × 282 × 555 mm
- 7.5 kWh of storage at 25.6 V nominal, from 300 Ah of LiFePO4 cells
- ≥6000 cycles, with depth of discharge rated separately at ≥95%, between a 22.4 V cut-off and a 28.8 V maximum charging voltage
- Up to 15 FLA24300 units in parallel for a 112.5 kWh bank
- 150 A and 3750 W recommended for charge and discharge, with 200 A and 5000 W peaks held for 15 seconds
- Built-in Smart BMS, breaker and fuse, CAN and RS485 ports, and an LCD with LED indicators
- 71 kg cabinet of 700 x 253 x 430 mm, wall- or floor-mounted at IP21, charging from 0-55 °C
Frequently Asked Questions
How much energy does the FLA24200 store?
5 kWh of nominal energy, from 200 Ah of nominal capacity at 25.6 V. Depth of discharge is a separate ≥95% rating and cycle life is given as 6000 cycles or more.
What is the recommended charge and discharge rate of the FLA24200?
120 A of current and 3000 W of power are the recommended figures. The peak is 150 A and 3750 W, each rated over 15 seconds.
How many FLA24200 units can run in parallel?
15, for a maximum system capacity of 75 kWh. The working window is 22.4-28.8 V, with a 22.4 V cut-off and a 28.8 V maximum charging voltage.
Where does the FLA24200 mount and what does it weigh?
39 kg on its own, in a 482 × 194 × 433 mm IP21 enclosure that is wall-mounted or floor-mounted. Packed it is a separate 44 kg at 600 × 282 × 555 mm.
How much energy does the FLA24300 store?
7.5 kWh, from 300 Ah of LiFePO4 cells at a 25.6 V nominal voltage. The depth of discharge is ≥95%, so nearly all of that energy is usable on each of the ≥6000 rated cycles, and the pack works across a 22.4-28.8 V operating window.
How many FLA24300 units can be connected in parallel?
15 units in parallel, which builds a 112.5 kWh bank because each FLA24300 contributes its own 7.5 kWh. Every unit carries CAN and RS485 communication ports and an LCD with LED indicators for reading its state.
What charge and discharge current does the FLA24300 take?
150 A is the recommended charge and discharge current, equal to 3750 W, and the pack peaks at 200 A and 5000 W for 15 seconds. It charges to a maximum of 28.8 V and cuts off at 22.4 V, protected by a built-in Smart BMS, breaker and fuse.
How big and how heavy is the FLA24300?
71 kg, in a cabinet measuring 700 x 253 x 430 mm. The shipping carton is larger at 780 x 427 x 550 mm with a 90 kg gross weight, so plan wall or floor mounting around the 700 x 253 x 430 mm unit rather than the carton.
How much energy does the FLA24500 store?
12.5 kWh is the nominal energy, from a 500 Ah LiFePO4 stack on a 25.6 V nominal bus. Depth of discharge is specified separately, at ≥95%.
How many FLA24500 units can be wired in parallel?
15 units is the maximum, for a system capacity of 187.5 kWh, each unit contributing its own 12.5 kWh at 25.6 V.