Felicity Solar Lithium Batteries FLA12200 / FLA12300
200 Ah of LiFePO4 on a 12.8 V bus, recommended at 100 A and 1500 W, with an 11.2 V cut-off and an IP21 floor-mounted case weighing 15 kg.
Models and prices
Technical Specifications
| Parameter | FLA12200 | FLA12300 |
|---|---|---|
| Performance & Electrical | ||
| Battery Type | LiFePO4 | |
| Cut-Off Voltage | 11.2 V | 12 V |
| Cycle Life | >6000 | |
| Depth of Discharge | ≥95% | |
| Max Charge/Discharge Power (15 s) | 2500 W | |
| Max Charging Voltage | 14.4 V | |
| Max Parallel Units | 16 | |
| Max System Capacity | 40.96 kWh | 60 kWh |
| Nominal Capacity | 200 Ah | 300 Ah |
| Nominal Energy | 2.56 kWh | 3.75 kWh |
| Nominal Voltage | 12.8 V | |
| Operating Voltage | 11.2-14.4 V | |
| Peak Charge/Discharge Current (15 s) | 200 A | |
| Protection | Built-in Smart BMS, Fuse | |
| Recommended Charge/Discharge Current | 100 A | |
| Recommended Charge/Discharge Power | 1500 W | 1875 W |
| Float Charging Voltage | 14.4 V | |
| Max Charging Current | 150 A | |
| Max Continuous Charge/Discharge Current | 150 A | |
| Build & Interfaces | ||
| Communication | CAN, RS485 | |
| Display Type | LED | |
| Installation | Floor-Mounted | |
| Package Dimensions | 391 x 257 x 310 mm | 443 x 344 x 305 mm |
| Package Weight | 18 kg | 29 kg |
| Operating Environment | ||
| Charging Temperature Range | 0-55 °C | |
| Discharging Temperature Range | -20 to 55 °C | |
| Protection Degree | IP21 | |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in the UAE
| Market | UAE |
|---|---|
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Main cities | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in the UAE that rests with the local authorities (DEWA, ADDC, SEWA). Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- 200 Ah of nominal capacity — 2.56 kWh — on a 12.8 V nominal bus, cutting off at 11.2 V
- 100 A recommended charge and discharge current, with 1500 W of recommended power
- 200 A and 2500 W peak charge and discharge, each held for 15 seconds
- 16 units in parallel reach a maximum system capacity of 40.96 kWh
- Cycle life beyond 6000 cycles, alongside a distinct depth-of-discharge rating of ≥95%
- 15 kg unit at 328 × 199 × 248 mm, IP21 and floor-mounted; 18 kg packed at 391 × 257 × 310 mm
- 3.75 kWh of nominal energy — 300 Ah at 12.8 V — in a single FLA12300 block
- Accepts up to 150 A charge current, with 100 A (1875 W) recommended for continuous duty
- 16 units in parallel build a 60 kWh bank from one model
- Rated beyond 6000 cycles, with depth of discharge rated separately at ≥95%
- 379 x 286 x 241 mm floor-mounted case weighing 26 kg, 29 kg packed
- Built-in Smart BMS and fuse, LED display, CAN and RS485, IP21 enclosure
Frequently Asked Questions
How much energy does the FLA12200 store?
2.56 kWh of nominal energy, from 200 Ah of nominal capacity on a 12.8 V bus. Depth of discharge is rated separately at ≥95%, and cycle life beyond 6000 cycles.
What charge and discharge current does the FLA12200 take?
100 A is the recommended charge and discharge current, with 1500 W of recommended power. The peak is 200 A and 2500 W, each held for 15 seconds.
How many FLA12200 units can be paralleled?
16, for a maximum system capacity of 40.96 kWh. Each unit reports over CAN and RS485 and shows its state on an LED display.
What is the cut-off voltage of the FLA12200?
11.2 V, the floor of an 11.2-14.4 V working window whose ceiling, 14.4 V, is also the maximum charging voltage. The pack charges from 0 to 55 °C and discharges from -20 to 55 °C.
How much energy does the FLA12300 store?
3.75 kWh — 300 Ah on a 12.8 V nominal bus. A depth of discharge of ≥95% leaves nearly all of that usable, and the LiFePO4 cells are rated beyond 6000 cycles.
How many FLA12300 batteries can be connected in parallel?
16 units, for a maximum system capacity of 60 kWh. Each unit is floor-mounted and communicates over CAN and RS485, so the bank presents itself as one pack to a compatible inverter.
What charge current does the FLA12300 accept?
150 A maximum, which is also the continuous charge and discharge ceiling, with 100 A (1875 W) recommended for everyday cycling. Peak current is 200 A for 15 seconds, and maximum charging voltage is 14.4 V, the same as the float voltage.
How much does the FLA12300 weigh and what does it measure?
26 kg, in a 379 x 286 x 241 mm case; packed for transport it measures 443 x 344 x 305 mm and weighs 29 kg. The enclosure is rated IP21, charging runs from 0 to 55 °C and discharging from -20 to 55 °C.