Critique

F06

Q: Que signifie F06 sur Apollo-5KLP1G01-MX ?

PV current sensor failed. Cause: PV current sensor failed. Correction recommandée: Restart the unit, if the error persists, contact the repair center.

Q: Que signifie F06 sur IVEM 6048 ?

Fault: Over current or surge detected by hardware. Cause: Hardware-detected overcurrent or surge condition. Correction recommandée: Restart the unit, if the error persists, contact the repair center.

Q: Que signifie F06 sur IVEM8048-II ?

Fault: Over current or surge detected by hardware. Cause: Hardware-detected over current or surge condition. Correction recommandée: Restart the unit, if the error persists, contact the repair center.

Q: Que signifie F06 sur T-REX-10KHP3G01 ?

PV current sensor failure. Correction recommandée: Restart the unit, if the error persists, contact the repair center.

PV current sensor failed.

6 Appareils signalant ce code

Apollo-5KLP1G01-MXSystème de stockage d’énergie↗ voir sur l’appareil

F06PV current sensor failed.Critique

Description

PV current sensor failed.

Cause

PV current sensor failed.

Correction recommandée

Restart the unit, if the error persists, contact the repair center.

Source:Apollo-5KLP1G01-All-in-one-ESS-User-Guide.pdf · page 42

IVEM 6048Onduleur↗ voir sur l’appareil

F06Over current or surge detected by hardware.Défaut

Description

Fault: Over current or surge detected by hardware.

Cause

Hardware-detected overcurrent or surge condition.

Correction recommandée

Restart the unit, if the error persists, contact the repair center.

Source:felicitysolar IVEM 6048 Solar Inverter User Guide.pdf · page 36

IVEM8048-IIOnduleur↗ voir sur l’appareil

F06Over current or surge detected by hardware.Défaut

Description

Fault: Over current or surge detected by hardware.

Cause

Hardware-detected over current or surge condition.

Correction recommandée

Restart the unit, if the error persists, contact the repair center.

Source:IVEM8K-12K-II_compressed.pdf · page 43

IVEM8048-LVOnduleur↗ voir sur l’appareil

F06Over current or surge detected by hardware.Défaut

Description

Over current or surge detected by hardware.

Correction recommandée

Restart the unit, if the error persists, contact the repair center.

Source:FelicitySolar IVEM8048-LV Single Phase Hybrid Inverter User Guide.pdf · page 37

T-REX-10KHP3G01Onduleur↗ voir sur l’appareil

F06PV current sensor failed.Défaut

Description

PV current sensor failure.

Correction recommandée

Restart the unit, if the error persists, contact the repair center.

Source:T-REX-10KHP3G01-Inverter-User-Guide.pdf · page 28

T-REX-50KHP3G01Onduleur↗ voir sur l’appareil

F06PV2 overcurrent fault.Défaut

Description

The current of the PV2 is too large, check the string current.

Source:T-REX-50KHP3G01-user-manual-.pdf · page 45

Compilé à partir des manuels utilisateur officiels FelicityESS. Consultez toujours le manuel de votre appareil et un technicien qualifié avant toute réparation.