Défaut

FAULT: LED1=ON, LED2=OFF, LED3=OFF, LED4=ON (Green OFF, Red ON)

Cell Temperature High.

2 Appareils signalant ce code
LPBF24200-MBatterie↗ voir sur l’appareil
FAULT: LED1=ON, LED2=OFF, LED3=OFF, LED4=ON (Green OFF, Red ON)Cell Temperature High.Défaut
Description

Cell pack over-temperature protection has tripped.

Cause

Cells heated above the safe operating temperature (charging range 0-55 degC, discharging range -20-60 degC per spec).

Correction recommandée

Stop charging/discharging, let the pack cool, and improve ventilation. if the fault persists at normal ambient, contact the supplier.

Source:Felicitysolar LPBF24200-M LiFePO4 Battery System for Households User Guide.pdf · page 9
LPBF48250Batterie↗ voir sur l’appareil
FAULT: LED1=ON, LED2=OFF, LED3=OFF, LED4=ON (Green OFF, Red ON)Cell Temperature High.Défaut
Description

Cell-pack over-temperature protection has tripped. Listed in the FAULT row of the LED table on page 7 as 'CELL TEMPERATURE HIGH'.

Cause

Cells heated above the safe operating temperature. Per the section 2.3 spec the working temperature range is Discharge -20 to +65 degC and Charge 0 to +55 degC; this fault trips when cells exceed those limits.

Correction recommandée

Stop charging / discharging, let the pack cool, and improve ventilation. if the fault persists at normal ambient temperature, contact the supplier for service (section 1.3 items 3 and 12 — only qualified service persons may open the unit).

Source:Battery Manual LPBF48250 (EN).pdf · page 7

Compilé à partir des manuels utilisateur officiels FelicityESS. Consultez toujours le manuel de votre appareil et un technicien qualifié avant toute réparation.