Défaut

FAULT: LED1=OFF, LED2=OFF, LED3=OFF, LED4=ON (Green OFF, Red ON)

BMS Temperature Low.

2 Appareils signalant ce code
LPBF24200-MBatterie↗ voir sur l’appareil
FAULT: LED1=OFF, LED2=OFF, LED3=OFF, LED4=ON (Green OFF, Red ON)BMS Temperature Low.Défaut
Description

BMS / electronics under-temperature protection has tripped.

Cause

Ambient temperature below the BMS operating range.

Correction recommandée

Move the battery to a warmer environment; do not operate below 0 degC for charging. Allow the BMS to warm before resuming use.

Source:Felicitysolar LPBF24200-M LiFePO4 Battery System for Households User Guide.pdf · page 9
LPBF48250Batterie↗ voir sur l’appareil
FAULT: LED1=OFF, LED2=OFF, LED3=OFF, LED4=ON (Green OFF, Red ON)BMS Temperature Low.Défaut
Description

BMS / electronics under-temperature protection has tripped. Listed in the FAULT row of the LED table on page 7 as 'BMS TEMPERATURE LOW'.

Cause

Ambient temperature below the BMS operating range. Section 1.3 item 14 forbids installation below 0 degC.

Correction recommandée

Move the battery to a warmer environment; do not install or operate below 0 degC. Allow the BMS to warm into the 0-45 degC operating range (section 3.2) before resuming use.

Source:Battery Manual LPBF48250 (EN).pdf · page 7

Compilé à partir des manuels utilisateur officiels FelicityESS. Consultez toujours le manuel de votre appareil et un technicien qualifié avant toute réparation.