Felicity IVGM25KHP3G3
The Felicity IVGM25KHP3G3 is a hybrid inverter with specifications as published by the manufacturer.
Technical Specifications
| Parameter | IVGM25KHP3G3 |
|---|---|
| Battery Data | |
| Supported Battery Type | LFP (LiFePO4) |
| Battery Voltage Range | 160~700Vdc |
| Additional Specifications | |
| Max. Charging Current | 50(A) |
| Max. Discharging Current | 50(A) |
| Max. DC Input Power | 40kW |
| AC Wiring Mode | 3L+N+PE |
| DC Injection Current | <0.5% In |
| PV String Input Data | |
| Max PV Input Power | 50kW |
| Max PV / DC Voltage | 1000Vdc |
| Min DC Input Voltage | 150Vdc |
| Start-up Voltage | 200Vdc |
| Nominal DC Voltage | 600Vdc |
| MPPT Voltage Range | 200~850Vdc |
| MPPT Voltage Range at Full Load | 666-850Vdc |
| Max PV Input Current | 30+30(A) |
| Max PV Short-Circuit Current | 39+39(A) |
| Strings per MPP Tracker | 2+2 |
| Electrical / AC Output Data | |
| Rated AC Power | 25kW |
| Max AC Apparent Power | 27.5kVA |
| Rated AC Output Current | 36.3A |
| Max AC Output Current | 39.8A |
| Peak Power (with duration) | 1.5times of |
| Nominal AC Voltage | 220/380,230/400 Vac (-20%~+15%) |
| Grid / AC Frequency | 50/60 Hz (45~55 Hz/55~65 Hz) |
| THD / THDi | <3% (At |
| Power Factor | 0.8( leading) to 0.8( lagging) |
| Communication | |
| Monitoring Module | WiFi/4G |
| Mechanical Data | |
| Net Weight | 41.4KG |
| Gross Weight | 47.4KG |
| Dimensions (W×H×D) | 642*445*237.5MM |
| Package Dimensions | 784*563*367MM |
| Installation / Mounting | Wall-mounted |
| Protection Features | |
| IP Rating | IP66 |
| Operating Conditions | |
| Operating Temperature | -40 to 60°C(>45°C Derating) |
| Relative Humidity | 0~95% (No Condensation) |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.