Felicity SCCM2024-II / SCCM3024-II / SCCM4524-II
20 A at 12/24 V MPPT solar charge controller with 3-stage charging.
Technical Specifications
| Parameter | SCCM2024-II | SCCM3024-II | SCCM4524-II |
|---|---|---|---|
| Electrical Data | |||
| Maximum Battery Current | 20 Amps | 30 Amps | — |
| Additional Specifications | |||
| Nominal System Voltage | 12V/24V (Auto) | ||
| Maximum Solar Input Voltage | 95V | 95V | 95 V |
| PV Array MPPT Voltage Range | 12 VDC: 15-80 VDC / 24 VDC: 30-80 VDC | ||
| Maximum Input Power | 12V - 280W / 24V - 550W | 12V - 420W / 24V - 830W | 12V - 625W / 24V - 1250W |
| PV Start-up Voltage | 15V | ||
| Charging Algorithm | 3-Step | ||
| Charging Stages | Bulk, Absorption, Float | ||
| Temperature Compensation Coefficient | -5 mV / °C / cell (25 °C ref.) | -5 mV / °C / cell (25 °C ref.) | -5 mV/°C/cell @ 25°C ref |
| Temperature compensation range | 0 °C to +50 °C | ||
| Transient Surge Protection | 4500 Watts / port | ||
| Display | LCD (built-in) | ||
| Installation | Indoor wall-mount | ||
| Ambient Temperature Range | 0 °C to +55 °C | 0 °C to +55 °C | 0°C to +55°C |
| Storage Temperature | -25 °C to 75 °C | -25 °C to 75 °C | - 25°C to 75°C |
| Humidity | 0~90% (No condensation) | 0~90% (No condensation) | 0%-90%RH(No condensing) |
| Enclosure Rating | IP20 (Indoor & Vented) | ||
| Warranty | 2 Years | ||
| Maximum Charge Current | 45 A | ||
| Product Size (W x H x D,mm) | 265x188x116 mm | ||
| Communication | |||
| MODBUS Communication | CAN (parallel), RS485 (BMS), WiFi (built-in) | ||
| Efficiency | |||
| Maximum Efficiency | 98% | ||
| PV Input | |||
| Compatible PV Systems | 12V/24V/48V | ||
| Battery Charging | |||
| Maximum Charging Current | 20A | 30A | — |
| Mechanical Data | |||
| Product Size (W x H x D) | 240x170x102 mm | ||
| Product Weight | 0.9 Kg | 1.06 Kg | — |
| IP Rating | IP31 | ||
| Operating Conditions | |||
| Enclosure | IP20 (indoor & vented) | ||
| Operating Temperature | 0°C to 55°C | ||
| Protection Features | |||
| Automatic Battery Voltage Detection | Yes | ||
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Saudi Arabia
| Market | Saudi Arabia |
| Grid authority / regulator | SEC, ECRA, SASO |
| Quotation currency | SAR |
| Support hours timezone | Asia/Riyadh |
| Delivery & installation coverage | Riyadh, Jeddah, Dammam, Mecca, Medina |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Saudi Arabia that is SEC, ECRA, SASO. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- MPPT tracking: Follows the array's maximum power point as light and heat change.
- Three-stage charging: Bulk, absorption and float, with temperature compensation.
- Auto voltage detection: Recognises the battery bank's nominal voltage on connection.
- Intelligent Maximum Power Point: Tracking technology increases efficiency 25%–30%
- Three-stage charging optimizes battery: performance
- Integrated intelligent slot compatible: with MODBUS communication
Frequently Asked Questions
What size battery bank does the SCCM2024-II suit?
It charges at up to 20 Amps and auto-detects 12V/24V (Auto).
What is the maximum solar array the SCCM2024-II accepts?
Open-circuit voltage must stay under 95V, and maximum input power is 12V - 280W / 24V - 550W.
Where can this controller be installed?
Indoors only. The enclosure is IP20 (indoor and vented), rated 0 °C to +55 °C ambient and up to 90% RH non-condensing.
What size battery bank does the SCCM3024-II suit?
It charges at up to 30 Amps and auto-detects 12V/24V (Auto).
What is the maximum solar array the SCCM3024-II accepts?
Open-circuit voltage must stay under 95V, and maximum input power is 12V - 420W / 24V - 830W.
What are the main performance specifications of the SCCM4524-II charge controller?
The SCCM4524-II charge controller offers a maximum charging current of 20A and operates with a maximum efficiency of 98%. It is compatible with 12V, 24V, and 48V PV systems and batteries.
Is the SCCM4524-II compatible with different PV system voltages?
Yes, the SCCM4524-II is compatible with 12V, 24V, and 48V PV systems, making it versatile for various solar installations.
What are the physical specifications of the SCCM4524-II, including its IP rating?
The SCCM4524-II has an IP31 rating, which means it is protected against solid objects greater than 2.5mm and limited protection against water. Specific dimensions and weight details can be obtained from the product manual.
What are the installation requirements for the SCCM4524-II?
The SCCM4524-II should be installed in an environment with temperatures ranging from 0°C to 55°C. It requires proper ventilation and should be mounted in a dry location to ensure optimal performance.