Felicity Solar IVGM125KHP3G1
The Felicity IVGM125KHP3G1 is a hybrid inverter with specifications as published by the manufacturer. Every figure on this page is taken from the manufacturer's
Download PDF Datasheet WhatsApp UsTechnical Specifications
| Parameter | IVGM125KHP3G1 |
|---|---|
| PV String Input Data | |
| Max PV Input Power | 250kW |
| Max PV / DC Voltage | 1000Vd.c. |
| Max PV Input Current | 10x45(A) |
| MPPT Voltage Range | 150~950Vd.c. |
| MPPT Voltage Range at Full Load | 555-950Vd.c. |
| Start-up Voltage | 180Vd.c. |
| Max PV Short-Circuit Current | 10x68(A) |
| Nominal DC Voltage | 600Vd.c. |
| Electrical / AC Output Data | |
| Max AC Output Power | 137kVA W |
| Rated AC Power | 125kW |
| AC Grid Connection Type | 3L+N+PE |
| Grid / AC Frequency | 50/60 Hz (45~55 Hz/55-65 Hz) |
| Nominal AC Voltage | 220/380,230/400 Vac (-20%~+15%) |
| Phase | 3L+N+PE |
| Rated AC Output Current | 181.2A |
| THD / THDi | <3% (At |
| Max AC Output Current | 198.6A |
| Parallel Compatible | Up to 12 in parallel |
| Power Factor | 0.8( leading) to 0.8( lagging) |
| Topology | Non-isolated |
| Battery Data | |
| Battery Voltage Range | 160~950Vd.c. |
| Max Charge Current | 120+120(A) |
| Max Discharge Current | 120+120(A) |
| Supported Battery Type | LFP (LiFePO4) |
| Protection Features | |
| IP Rating | IP66 |
| Overvoltage Category | OVC II (DC), OVC III(AC) |
| Mechanical Data | |
| Dimensions (W×H×D) | 1271*810*364MM |
| Gross Weight | 198KG |
| Installation / Mounting | Wall-mounted |
| Net Weight | 155.5KG |
| Package Dimensions | 1410*960*646MM |
| Operating Conditions | |
| Operating Temperature | -40 to 60 °C (> 45 °C derating) |
| Relative Humidity | 0-100% (No condensation) |
| Communication | |
| Monitoring Module | WIFI/Bluetooth/4G/LAN(optional) |
Note: Specifications are based on the official Felicity Solar IVGM125KHP3G1 datasheet. Values may be subject to change; always verify against the latest manufacturer documentation before system design and procurement.
Availability & grid compliance in UAE
| Market | UAE |
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Delivery & installation coverage | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in UAE that is DEWA, ADDC, SEWA. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Availability & grid compliance in Netherlands
| Market | Netherlands |
| Grid authority / regulator | ACM Netherlands |
| Quotation currency | EUR |
| Support hours timezone | Europe/Amsterdam |
| Delivery & installation coverage | Amsterdam, Rotterdam, The Hague, Utrecht |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Netherlands that is ACM Netherlands. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.