Felicity Solar IVGM6KLP1G2
The Felicity IVGM6KLP1G2 is a hybrid inverter with specifications as published by the manufacturer. Every figure on this page is taken from the manufacturer's d
Download PDF Datasheet WhatsApp UsTechnical Specifications
| Parameter | IVGM6KLP1G2 |
|---|---|
| PV String Input Data | |
| Max PV Input Power | 12000W |
| Max PV / DC Voltage | 500V |
| Max PV Input Current | 18+18 A |
| MPP Trackers / Strings per Tracker | 2/1+1 |
| MPPT Efficiency | >99% |
| MPPT Voltage Range | 150V-425V |
| Number of MPP Trackers | 2/1+1 |
| Start-up Voltage | 125V |
| Max PV Short-Circuit Current | 27+27 A |
| MPPT Nominal Voltage | 370V |
| Electrical / AC Output Data | |
| European Efficiency | 96.5% |
| Max Efficiency | 97.6% |
| AC Frequency Range | 50Hz/45Hz-55Hz 60Hz/55Hz-65Hz |
| AC Grid Connection Type | L+N+PE |
| Nominal AC Voltage Range | 220V/230 0.85Un-1.1 Un |
| Phase | L+N+PE |
| Rated AC Output Current | 27.3/26.1 A |
| THD / THDi | <3% (of |
| Max AC Output Current | 30/28.7 A |
| Topology | Non-Isolated |
| Battery Data | |
| Battery Voltage Range | 40V~60V |
| Max Charge Current | 135A |
| Max Discharge Current | 135A |
| Protection Features | |
| IP Rating | IP65 |
| Overvoltage Category | OVC II (DC), OVC III (AC) |
| Mechanical Data | |
| Cooling Method | Natural cooling |
| Dimensions (W×H×D) | 470*376*250.75MM |
| Gross Weight | 23KG |
| Net Weight | 19.8KG |
| Package Dimensions | 578*454*348MM |
| Operating Conditions | |
| Max Altitude | 2000m |
| Noise Level | <30dB |
| Operating Temperature | -40°C~+60°C, >45°C Derating |
| Relative Humidity | 0-100% |
Note: Specifications are based on the official Felicity Solar IVGM6KLP1G2 datasheet. Values may be subject to change; always verify against the latest manufacturer documentation before system design and procurement.
Availability & grid compliance in UAE
| Market | UAE |
| Grid authority / regulator | DEWA, ADDC, SEWA |
| Quotation currency | AED |
| Support hours timezone | Asia/Dubai |
| Delivery & installation coverage | Dubai, Abu Dhabi, Sharjah, Ajman, Ras Al Khaimah |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in UAE that is DEWA, ADDC, SEWA. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Availability & grid compliance in Iraq
| Market | Iraq |
| Grid authority / regulator | Ministry of Electricity Iraq |
| Quotation currency | IQD |
| Support hours timezone | Asia/Baghdad |
| Delivery & installation coverage | Baghdad, Basra, Erbil, Mosul |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Iraq that is Ministry of Electricity Iraq. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.