Felicity T-REX-10KLP3G01
Discover the Felicity Solar T-REX-10KLP3G01 Inverter with dimensions 792x597x351 mm, ideal for diverse climates from -25°C to 60°C.
Technical Specifications
| Parameter | T-REX-10KLP3G01 |
|---|---|
| Additional Specifications | |
| Battery Type | Li-Ion /Lead-acid |
| Battery Voltage Range | 40V~60V |
| Communication with BMS | RS485,CAN |
| Euro efficiency | 97.0% |
| Full Load DC Voltage Range | 450~850Vd.c |
| GFCI Protection | Integrated |
| Input Voltage Range | 184~264.5Vac |
| MPPT Range | 200~850Vd.c |
| Max. AC Current | 18A |
| Max. AC Output Power | 10000VA/10000W |
| Max. Charging Current | 200A |
| Max. DC Input Power | 13000W |
| Max. DC Input Voltage | 900V |
| Max. Discharging Current | 200A |
| Max. PV Isc | 18A/18A |
| Nominal voltage | 720V |
| Output shorted protection | Integrated |
| Power Factor | 0.8(leading)to0.8(lagging) |
| Rated AC Frequency | 50 /60 Hz (45~55Hz/55~65Hz) |
| Rated AC Output Power | 10000VA/10000W |
| Rated AC Voltage | L1/L2/L3/N/PE, 230/400Vac |
| Safety EMC / Standard | IEC/EN61000-6-1/2/3/4,IEC/EN62109-1,IEC/EN62109-2 |
| Start-up Voltage | 180V |
| Max Charging / Discharging Current | 200/200 A |
| Max Charging / Discharging Power | 10000 W |
| Max Recommended PV Power | 13000 W |
| Max PV Voltage | 900 V |
| PV Voltage Range | 160-900 V |
| MPPT Voltage Range | 200-850 V |
| MPPT Voltage Range at Full Power | 450-850 V |
| Nominal PV Voltage | 720 V |
| Max Short Circuit Current | 18/18 A |
| Number of MPPT / Strings per MPPT | 2/1 |
| Nominal Grid Voltage | L1/L2/L3/N/PE, 230/400 Vac |
| Grid Voltage Range | 184-264.5 Vac |
| Nominal Grid Frequency | 50/60 Hz |
| Max Grid Input Current | 30 A |
| Max Charging Current (from Grid) | 200 A |
| Nominal AC Output Current | 14.5 A |
| Max AC Output Current | 18 A |
| Max Continuous AC Pass-Through | 30 A |
| Power Factor Adjustable | 0.8 leading to 0.8 lagging |
| THDi | <3% |
| Backup AC Output Rated Power | 10000W / 10000VA |
| Backup AC Max Output Current | 30 A |
| Backup Rated Output Voltage | L1/L2/L3/N/PE, 230/400 Vac |
| Backup Rated Output Frequency | 50/60 Hz |
| Max Efficiency | 97.6% |
| European Efficiency | 97.0% |
| MPPT Efficiency | 99.9% |
| Output Overload Protection | Built-in |
| Output Overvoltage Protection | Built-in |
| Output Short-Circuit Protection | Built-in |
| Anti-Islanding Protection | Built-in |
| Insulation Resistor Detection | Built-in |
| Communication | RS232/RS485 |
| BMS Communication | CAN/RS485 |
| Monitor Module | WiFi/GPRS |
| Display | LCD+LED |
| Installation Style | Wall-mounted |
| Package Dimension | 792*597*351 MM |
| Package Dimensions | 792 x 597 x 351 mm |
| IP Rating | IP65 |
| Cooling | Smart Cooling |
| Humidity | 0~95%(Nocondensation) |
| Operating Temperature Range | -25to60°C(>50°Cderating) |
| Grid Standards | VDE-AR-N 4105, G99/1, EN50549-1, CEI 0-21, AS 4777.2, NRS 097-2-1 |
| Safety Standards | IEC 62109-1/2, IEC 62040-1 |
| EMC | EN61000-6-1, EN61000-6-3 |
| Warranty | 10 Years |
| Mechanical Data | |
| Gross Weight | 47.1 kg |
| Net Weight | 47.1 kg | 38.9 kg |
| Dimensions (H x W x D) | 792 mm x 597 mm x 351 mm |
| PV Input | |
| Wire Size | 4.0-6.0 mm² | 50 mm² |
| Operating Conditions | |
| Relative Humidity | 0-100% |
| Maximum Altitude | 2000 m |
| Ambient Temperature Range | -25°C to 60°C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Multifunctional inverter with solar: charger and battery charger
- Comprehensive LCD display for: easy operation
- Supports battery charging, AC/solar: charging, and input voltage adjustment
Frequently Asked Questions
What are the main performance specifications of the T-REX-10KLP3G01 inverter?
The T-REX-10KLP3G01 inverter is designed for high efficiency and reliable performance. It supports a wide range of input voltages and offers robust power output suitable for various solar energy systems.
Is the T-REX-10KLP3G01 inverter compatible with all solar panels?
The T-REX-10KLP3G01 is compatible with most solar panels available on the market. However, it is recommended to check the voltage and current specifications of your solar panels to ensure optimal compatibility.
What are the physical specifications of the T-REX-10KLP3G01 inverter?
The inverter measures 792 mm in height, 597 mm in width, and 351 mm in depth. It has a net weight of 38.9 kg and a gross weight of 47.1 kg.
What are the installation requirements for the T-REX-10KLP3G01 inverter?
Installation requires a wire size of 4.0-6.0 mm² for connections, with a cable diameter of 7 mm. For larger connections, a wire size of 50 mm² and a cable diameter of 15 mm are needed.