Felicity SCCM15048
Discover the Felicity Solar SCCM15048 charge controller with 150A max charging current and overcurrent protection for efficient solar energy management.
Technical Specifications
| Parameter | SCCM15048 |
|---|---|
| Additional Specifications | |
| Ingress Protection | IP54 |
| Maximum Charge Current | 150 Amps |
| Maximum Solar Input Voltage | 500V |
| PV Start-up Voltage | 120V |
| MPPT Voltage Range | 150-450Vdc |
| PV Limiting Current | 30A |
| Maximum Input Power | 9000W |
| Transient Surge Protection | 2* rated power for 5s |
| Protections | Solar high voltage disconnect / reconnect; battery high voltage disconnect / reconnect; high temperature disconnect / reconnect |
| Charging Algorithm | 3-Step |
| Charging Stages | Bulk, Absorption, Float |
| Maximum Efficiency | 98% |
| Communication | RS485 & CAN (MODBUS); Bluetooth and WiFi built-in |
| Supported Battery Type | Lithium, AGM, GEL, Flooded, user-defined |
| Product Size (W x H x D) | 422x370x140 mm |
| Outer Carton Size (W x H x D) | 485x464x198 mm |
| Net Weight | 9.7 kg |
| Gross Weight | 12 kg |
| Display | LCD (built-in) |
| Storage Temperature | -25°C to 75°C |
| Humidity | 0%-90%RH (No condensing) |
| Battery Charging | |
| Battery rated voltage | 48V |
| Absorption voltage | 57.6V |
| Float voltage | 54.4V |
| Battery C.V. charging duration | 150 minutes |
| Maximum charging current | 150A |
| Mechanical Data | |
| IP Rating | IP54 |
| Dimensions (A x B) | 399mm x 304.5mm |
| Operating Conditions | |
| Operating temperature | 0°C to 55°C |
| Protection Features | |
| Overcurrent protection | Yes |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Yemen
| Market | Yemen |
| Grid authority / regulator | Public Electricity Corporation (PEC), Ministry of Electricity and Energy |
| Quotation currency | YER |
| Support hours timezone | Asia/Aden |
| Delivery & installation coverage | Sana'a, Aden, Taiz, Al Hudaydah, Mukalla |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Yemen that is Public Electricity Corporation (PEC), Ministry of Electricity and Energy. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Intelligent Maximum Power Point: Tracking technology increases efficiency 25%–30%
- Three-stage charging optimizes battery: performance
- Maximum charging current up: to 150A
- Maximum efficiency up to: 98%
- Automatic battery voltage detection: Automatic battery voltage detection
- Supports lithium battery and: various lead-acid batteries, AGM and GEL battery
Frequently Asked Questions
What are the main performance specifications of the SCCM15048 charge controller?
The SCCM15048 charge controller has a maximum charging current of 150A, an absorption voltage of 57.6V, and a float voltage of 54.4V. It is designed for a battery rated voltage of 48V.
Is the SCCM15048 compatible with all solar panel systems?
The SCCM15048 is compatible with solar panel systems that can operate within its voltage and current specifications, particularly those designed for a 48V battery system.
What are the physical specifications of the SCCM15048?
The SCCM15048 has dimensions of 399mm x 304.5mm and an IP54 rating, which means it is protected against dust and water splashes.
What are the installation requirements for the SCCM15048?
The SCCM15048 should be installed in an environment with temperatures ranging from 0°C to 55°C. It also requires proper ventilation to ensure efficient operation.