Felicity SCCM8048-P
Discover the Felicity Solar SCCM8048-P Charge Controller with 80A max charging current and 98% efficiency for optimal solar energy management.
Technical Specifications
| Parameter | SCCM8048-P |
|---|---|
| Additional Specifications | |
| Maximum Input Power | 24V-2200W |
| PV Array MPPT | 12 VDC/24VDC/48 VDC |
| PV Array voltage & Battery current | Maximum Battery Current Battery Current(Amps) 130 145 Array Voltage(Volts) For SCCM8048-P |
| Voltage Range | 15-130VDC/30-130VDC 60-130VDC |
| Nominal System Voltage | 12V, 24V, 48V DC (Auto detection) |
| Maximum Solar Input Voltage | 145 V |
| PV Start-up Voltage | 20 V |
| PV Array MPPT Voltage Range (12V battery) | 15-130VDC |
| PV Array MPPT Voltage Range (24V battery) | 30-130VDC |
| PV Array MPPT Voltage Range (48V battery) | 60-130VDC |
| Maximum Input Power (12V) | 1100 W |
| Maximum Input Power (24V) | 2200 W |
| Maximum Input Power (48V) | 4400 W |
| Transient Surge Protection | 4500 W / port |
| Charging Algorithm | 3-Step |
| Charging Stages | Bulk, Absorption, Float |
| Temperature Compensation Coefficient | -5 mV/°C/cell @ 25°C ref |
| Protections | Solar HV disconnect/reconnect, Battery HV disconnect/reconnect, High temperature disconnect/reconnect |
| Special Function | Match the inverter to the MPPT controller (MPPT-match) |
| Product Weight | 6.8 Kg |
| Product Size (W x H x D) | 338 x 206 x 135 mm |
| Display | LCD (built-in) |
| Installation | Indoor wall-mount |
| Heatsink temperature & Battery current | Maximum Battery Current Battery Current(Amps) 60 62.5 65 67.5 70 72.5 75 77.5 80 Heatsink Temperature (degrees C) |
| Humidity | 0%-90%RH(No condensing) Match the MPPT flashes, indicating that the inverter is |
| Storage Temperature | - 25°C to 75°C |
| Temperature compensation range | 0 °C to +50 °C |
| Ambient Temperature Range | 0°C to +55°C |
| Enclosure Rating | IP20 (Indoor & Vented) |
| Warranty | 2 Years |
| PV Input | |
| Maximum Charging Current | 80 A |
| Battery Charging | |
| Float Voltage | 0 | 13.60V |
| Battery Rated Voltage | 12V | 24V | 48V |
| Absorption Voltage | 14.40V |
| Battery Equalization Voltage | 14.60V |
| Battery C.V. Charging Duration | 150 minutes |
| Efficiency | |
| Maximum Efficiency | 98% |
| Mechanical Data | |
| IP Rating | IP20 |
| Protection Features | |
| Overcurrent Protection | Yes |
| Operating Conditions | |
| Operating Temperature | 0°C to 55°C |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Intelligent Maximum Power Point: Tracking technology increases efficiency 25%–30%
- Compatible for PV systems: in 12V, 24V or 48V
- Three-stage charging optimizes battery: performance
- Automatic battery voltage detection: Automatic battery voltage detection
- Supports various lead-acid batteries,: AGM and gel battery
- Integrated intelligent slot compatible: with MODBUS communication
Frequently Asked Questions
What are the main performance specifications of the SCCM8048-P charge controller?
The SCCM8048-P charge controller has a maximum charging current of 80A and achieves a maximum efficiency of 98%. It supports 12V, 24V and 48V battery systems with automatic voltage detection.
Is the SCCM8048-P charge controller compatible with different battery types?
Yes, the SCCM8048-P is compatible with various battery types, as it supports different charging voltages such as absorption voltage at 14.40V, float voltage at 13.60V, and equalization voltage at 14.60V.
What are the physical specifications of the SCCM8048-P charge controller?
The SCCM8048-P has an IP20 rating, indicating it is protected against solid objects larger than 12.5mm. For detailed dimensions and weight, please refer to the product manual.
What are the installation requirements for the SCCM8048-P charge controller?
The SCCM8048-P should be installed in a location where the operating temperature is between 0°C and 55°C. Ensure proper ventilation and avoid exposure to moisture due to its IP20 rating.