Felicity IVDM4224P1G3
The Felicity IVDM4224P1G3 is an off-grid inverter with specifications as published by the manufacturer.
Technical Specifications
| Parameter | IVDM4224P1G3 |
|---|---|
| Battery Data | |
| Supported Battery Type | Lead-acid or Lithium-ion |
| Battery Voltage Range | 20-30 |
| PV String Input Data | |
| Start-up Voltage | 60-500 |
| MPPT Nominal Voltage | 300-425 V |
| PV Operating Voltage Range | 60 V – 425 V |
| Additional Specifications | |
| PV Input Voltage Range(V) | 60-425 |
| Rated PV Input Voltage(V) | 300-425 |
| Total Current Harmonic Distortion THDi | <3% |
| Rated Input Frequency | 50Hz/60Hz |
| AC Output Short Circuit Protection | Yes |
| Overvoltage Load Drop Protection | Yes |
| Electrical / AC Output Data | |
| Output Type | L+N+PE |
| Output Frequency | 50Hz/60Hz |
| Output Waveform | Pure Sine Wave |
| Topology | Non-Isolated |
| Protection Features | |
| DC Reverse Polarity Protection | Yes |
| Over-Current Protection | Yes |
| Over-Voltage Protection | Yes |
| Over-Temperature / Thermal Protection | Yes |
| DC Component Monitoring | Yes |
| Overvoltage Category | OVC II(DC), OVC III (AC) |
| IP Rating | IP6X |
| Communication | |
| Monitoring Module | WIFI/LAN (Optional) |
| Mechanical Data | |
| Net Weight | 8.3kg |
| Gross Weight | 10.3kg |
| Dimensions (W×H×D) | 403x313x137mm |
| Package Dimensions | 495x405x227mm |
| Cooling Method | Intelligent Air Cooling |
| Operating Conditions | |
| Operating Temperature | -40 to +60°C, >45°C Derating |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.