Felicity FLM500-125/261
The Felicity FLM500-125/261 is an energy storage system with a 400V nominal bus, ≥8000 rated, 2670KG IP55 shipped.
Technical Specifications
| Parameter | FLM500-125/261 |
|---|---|
| PV String Input Data | |
| Cell Technology | LFP 3.2V/314 Ah |
| Battery Data | |
| System Battery Configuration | 260S1P |
| Nominal Capacity | 261.2kWh |
| Max Charge/Discharge Rate | 0.5P |
| Depth of Discharge | 95% |
| Cycle Life | ≥8000 |
| Electrical / AC Output Data | |
| Nominal Voltage | 400V |
| Input Voltage Range | 360-440V |
| Rated AC Power | 125kW |
| Grid / AC Frequency | 50Hz/60Hz THD <3% |
| Adjustable Power Factor Range | -1~1 |
| Unbalanced Output | 100% |
| Maximum System Efficiency | ≥90% |
| Max. Parallel Units | "On grid:20 pcs; Off grid: 6 pcs" |
| Additional Specifications | |
| Access way | 3P4L |
| Anti-corrosion Degree | C4 |
| Protection Features | |
| DC Component Detection | <0.5% |
| Aerosol / Fire Suppression | Aerosol fire extinguishing equipment, Smoke detector, Heat detector, Water fire |
| Communication | |
| Communication Interface | Ethernet/RS485 |
| Mechanical Data | |
| Dimensions (W×H×D) | 1050*2400*1350(mm) |
| Weight | 2670KG IP55 |
| Cooling Method | Liquid cooling |
| Operating Conditions | |
| Noise Level | <75db |
| Relative Humidity | 0-95% |
| Operating Temperature | -25~55°C(Derating from 45°C) |
| Operating Altitude | 2000m (Derating from 2000m) |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.