Felicity IVAM6048P1G1
Discover the Felicity Solar IVAM6048P1G1 Inverter with IP65 rating, overload, over-temperature, and short-circuit protection.
Technical Specifications
| Parameter | IVAM6048P1G1 |
|---|---|
| Additional Specifications | |
| Full Load MPPT Voltage Range(V) | 300~425 |
| Generator Input Current(A) | 35 |
| Grid Input Current(A) | 35 |
| MPPT Voltage Range(V) | 90~425 |
| Max. AC Output Current(A) | 26.1 |
| Max. AC Output Power(VA/W) | 6000 |
| Max. Charging Current(A) | 135 |
| Max. Discharging Current(A) | 135 |
| Max. Input Power to Battery (W) | 6000 |
| Max. Input Short-Circuit Current(A) | 27+27 |
| Max. Operating PV Input Current(A) | 20+20 |
| Max. PV Input Power(W) | 9600 |
| Max. PV Input Voltage(V) | 500 |
| Max. PV access power(W) | 12000 |
| No. of MPP Trackers/No. of Strings MPP Tracker | 2/1+1 |
| PV Input Voltage Range(V) | 90~500 |
| Peak Power(W) | 2 times of rated power, 10s |
| Rated AC Output Power(VA/W) | 6000 |
| Rated Input Voltage(V) | 230 |
| Rated Output Voltage(V) | 230 |
| Rated PV Input Voltage(V) | 370 |
| Start-up Voltage(V) | 120 |
| Battery Type | Lead-acid or Lithium-ion |
| Battery Voltage Range | 40~60 V |
| Charging Strategy for Li-Ion Battery | Self-adaptation to BMS |
| Communication Interface | RS485, CAN |
| Euro Efficiency | 96.50% |
| Inverter Topology | Non-Isolated |
| MPPT Efficiency | >99% |
| Max. AC Output Power | 6000 VA/W |
| Max. Efficiency | 97.60% |
| Monitor Mode | WIFI/LAN(optional) |
| Number of Battery Input | 1 |
| Output Voltage Waveform | Pure Sine Wave |
| Over Voltage Category | Over-voltage Category II (DC), Category III (AC) |
| Overvoltage Load Drop Protection | Yes |
| Power Network Monitoring | Yes |
| Rated Input Frequency | 50Hz/60Hz |
| Rated Output Frequency | 50Hz/60Hz |
| Safety EMC/Standard | IEC/ENIEC/EN62109-1,61000-6-1/2/3/4,IEC/EN62109-2 |
| Surge Protection Level | TYPE II(DC), TYPE II(AC) |
| Thermal Protection | Yes |
| Total Current Harmonic Distortion THDi | <3% |
| Package Dimension | 412x532x270mm |
| Type of Cooling | Intelligent Air Cooling |
| Noise | <55 dB |
| Permissible Altitude | 3000m |
| Permissible Ambient Humidity | 0-100% |
| Electrical Data | |
| Full Load MPPT Voltage Range | 300~425 V |
| Grid Input Current | 35 A |
| MPPT Voltage Range | 90~425 V |
| Max. AC Output Current | 26.1 A |
| Max. Charging Current | 135 A |
| Max. Discharging Current | 135 A |
| Max. Input Short-Circuit Current | 27+27 A |
| Max. Operating PV Input Current | 20+20 A |
| Max. PV Input Power | 9600 W |
| Max. PV Input Voltage | 500 V |
| Max. PV access power | 12000 W |
| Rated Input Voltage | 230 V |
| Rated Output Voltage | 230 V |
| Rated PV Input Voltage | 370 V |
| Start-up Voltage | 120 V |
| Battery Input | |
| Wire Size | 2~0AWG |
| Cable Size | 35~50mm² |
| Communication | |
| Parallel Communication Port 1 | CAN interface |
| Parallel Communication Port 2 | CAN interface |
| BMS 485/CAN | For battery communication |
| Mechanical Data | |
| IP Rating | IP65 |
| Dimensions (W x H x D) | 320mm x 435mm x 183.2mm |
| Operating Conditions | |
| Operating Temperature Range | -40to+60°C,>45°CDerating |
| Maximum Altitude | 3000 meters |
| Humidity | ≤95% |
| Protection Features | |
| Overload Protection | Yes |
| Over-temperature Protection | Yes |
| Short-circuit Protection | Yes |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- Multi-functional inverter integrating inverter,: solar charger, and battery charger
- Provides uninterruptible power supply: in a compact design
- LCD display for easy: configuration and operation
- Supports self-consumption operation: Supports self-consumption operation
- Auto restart while AC: is recovering
- Programmable multiple operation modes:: on-grid, off-grid, and UPS
Frequently Asked Questions
What are the main performance specifications of the IVAM6048P1G1 inverter?
The IVAM6048P1G1 inverter is designed for high efficiency and reliable performance. It supports a wide range of power and voltage requirements, making it suitable for various solar energy systems.
Is the IVAM6048P1G1 inverter compatible with different battery systems?
Yes, the IVAM6048P1G1 inverter is compatible with various battery systems and includes a BMS 485/CAN interface for seamless battery communication.
What are the physical specifications of the IVAM6048P1G1 inverter?
The inverter measures 320mm x 435mm x 183.2mm and has an IP65 rating, ensuring it is dust-tight and protected against water jets.
What are the installation requirements for the IVAM6048P1G1 inverter?
Installation requires appropriate wire sizes of 2~0AWG and cable sizes of 35~50mm². It should be installed in environments with humidity levels ≤95% and at altitudes up to 3000 meters.