Felicity FLS48100SG2
Discover the Felicity Solar FLS48100SG2 Battery with 51.2V, 100Ah capacity, and advanced LiFePO4 technology for reliable energy storage.
Technical Specifications
| Parameter | FLS48100SG2 |
|---|---|
| Operating Conditions | |
| Elevation | Operating environment: Suitable for indoor |
| Relative Humidity | 5% ~ 95% |
| Storage Temperature | 0°C to +35°C |
| Working Temperature | -20°C~+55°C |
| Additional Specifications | |
| Power | SOC<10%(Default):LED1 Flash SOC<10%(Default): LED1 Flash SOC<10% (Default):LED1 Flash NO NO |
| Connection Method | Phone/Email dl, password:12345678,After successfully conne Password |
| Max. Charging Current | 60A*N(Max=400A) |
| Power/Running | on, press and hold for 3 seconds to turn off; 2. A green light indicates normal status, |
| Recommend Charge/Discharge Power | 50A 100A 150A 200A 250A 300A 350A 400A |
| Solar Panel | 4. |
| Cycle Life | ≥6000Cycles |
| Depth of Discharge | ≥95% DOD |
| Display type | Control Module:LCD/Battery Module:LED*4 |
| Module Nominal Capacity | 100Ah |
| Module Nominal Energy | 5.12KWh |
| Module Nominal Voltage | 51.2V |
| System Nominal Energy | 5.12 – 40.96 kWh (1–8 modules) |
| System Nominal Voltage | 51.2V |
| System Operating Voltage | 44.8~57.6V |
| Number of Battery Modules | 1-8 |
| Recommended Charge/Discharge Current | 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 A |
| Scalability | Max 8 packs in parallel (40.96 kWh) |
| Floating Charging Voltage | 57.6 V |
| Installation | Wall-Mounted / Floor-Mounted |
| Package Dimension | 712x562x298mm |
| Control Module Weight | 46 kg |
| Control Module Dimensions | 600 x 450 x 180 mm |
| Battery Module Weight | 46 kg |
| Battery Module Dimensions | 600 x 450 x 180 mm |
| Protection Level | IP21 |
| Storge Temperature Range | 0°C~+35°C |
| Working Temperature Range | Discharge:-20°C~+55 °C |
| Altitude | ≤2000m |
| Humidity | 5%~95% |
| Working Temperature (Charge) | 0°C to +55°C |
| Working Temperature (Discharge) | -20°C to +55°C |
| Warranty | 10 Years |
| Electrical Data | |
| Depth of Discharge (DoD) | ≥95% |
| Max Charging Voltage | 57.6 V |
| Max Continuous Charge/Discharge Current | 60 / 120 / 180 / 240 / 300 / 360 / 400 / 400 A |
| Peak Charge/Discharge Current (15s) | 100 / 200 / 300 / 400 / 500 / 600 / 700 / 800 A |
| Protection Features | |
| Over Current Protection | Over |
| Over Voltage Protection | Built-in smart BMS, Breaker, Fuse | Yes |
| Under Voltage Protection | Yes |
| Battery Specifications | |
| Battery Type | LiFeP04 |
| Rated Voltage | 48 V |
| Communication | |
| Communication Interface | RS485 / CAN |
| BMS Specifications | |
| BMS Version | S16 |
| Mechanical Data | |
| Protection | Built-in smart BMS, Breaker, Fuse |
Figures are measured at the test conditions the manufacturer’s datasheet states. A dash means the manufacturer publishes no figure for that model.
Configurations & shipping weights
| Configuration | Weight | Dimensions (W × D × H) |
|---|---|---|
| FLS48100SMG2 — 5.12 kWh (1 × 5.12 kWh module) | 92 kg | — |
| FLS48100SMG2 — 10.24 kWh (2 × 5.12 kWh modules) | 138 kg | — |
| FLS48100SMG2 — 15.36 kWh (3 × 5.12 kWh modules) | 184 kg | — |
| FLS48100SMG2 — 20.48 kWh (4 × 5.12 kWh modules) | 230 kg | — |
| FLS48100SMG2 — 25.6 kWh (5 × 5.12 kWh modules) | 276 kg | — |
| FLS48100SMG2 — 30.72 kWh (6 × 5.12 kWh modules) | 322 kg | — |
| FLS48100SMG2 — 35.84 kWh (7 × 5.12 kWh modules) | 368 kg | — |
| FLS48100SMG2 — 40.96 kWh (8 × 5.12 kWh modules) | 414 kg | — |
This listing covers several shippable configurations. Each row is the manufacturer’s stated figure for that build; the page weight above is the smallest one, which is what a single unit ships at.
Availability & grid compliance in Sudan
| Market | Sudan |
| Grid authority / regulator | Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum |
| Quotation currency | SDG |
| Support hours timezone | Africa/Khartoum |
| Delivery & installation coverage | Khartoum, Omdurman, Port Sudan, Kassala, Nyala |
Figures on this page are the manufacturer's own, measured at the test conditions the datasheet states — they do not change by country. What changes is the approval that has to be met before the unit is energised: in Sudan that is Sudanese Electricity Distribution Company (SEDC), Ministry of Energy and Petroleum. Confirm the grid code, import requirements and any local certification with them, or with us, before you order.
Key Features & Technical Highlights
- High-quality, reliable power for: various devices
- Long lifespan and suitability: for high-temperature environments
- Compact design requiring minimal: installation space
- Battery management system independently: developed
- Parallel connection for high-capacity,: multi-module systems
- LiFePO4: Higher safe performance: and longer cycle life.
Frequently Asked Questions
What are the main performance specifications of the FLS48100SG2 battery?
The FLS48100SG2 battery features a nominal voltage of 51.2V and a nominal capacity of 100Ah. It is a Lithium Iron Phosphate (LiFePO4) battery, known for its high efficiency and long cycle life.
Is the FLS48100SG2 battery compatible with other systems?
Yes, the FLS48100SG2 battery is compatible with systems that support a 48V rated voltage. It also includes a communication interface with CAN/RS485 for integration with various systems.
What are the physical specifications of the FLS48100SG2 battery?
The physical dimensions and weight of the FLS48100SG2 battery are not specified here, but it is designed to be compact and efficient. It is important to check the manufacturer's datasheet for detailed dimensions and weight.
What are the installation requirements for the FLS48100SG2 battery?
The FLS48100SG2 battery should be installed in an environment with a working temperature range of -20°C to +55°C and a relative humidity of 5% to 95%. Ensure the installation site is below 2000 meters in elevation.