Felicity MJS SCCM2024-II / SCCM3024-II
Régulateur solaire MPPT 20 A at 12/24 V avec charge en trois étapes.
Spécifications techniques
| Paramètre | SCCM2024-II | SCCM3024-II |
|---|---|---|
| Données électriques | ||
| Maximum Battery Current | 20 Amps | 30 Amps |
| Spécifications supplémentaires | ||
| Nominal System Voltage | 12V/24V (Auto) | |
| Maximum Solar Input Voltage | 95V | |
| PV Array MPPT Voltage Range | 12 VDC: 15-80 VDC / 24 VDC: 30-80 VDC | |
| Maximum Input Power | 12V - 280W / 24V - 550W | 12V - 420W / 24V - 830W |
| PV Start-up Voltage | 15V | |
| Charging Algorithm | 3-Step | |
| Charging stages | Bulk, Absorption, Float | |
| Temperature compensation coefficient | -5 mV / °C / cell (25 °C ref.) | |
| Temperature compensation range | 0 °C to +50 °C | |
| Transient Surge Protection | 4500 Watts / port | |
| Display | LCD (built-in) | |
| Installation | Indoor wall-mount | |
| Ambient Temperature Range | 0 °C to +55 °C | |
| Storage Temperature | -25 °C to 75 °C | |
| Humidity | 0~90% (No condensation) | |
| Enclosure Rating | IP20 (Indoor & Vented) | |
| Warranty | 2 Years | |
| Communication | ||
| Communication | CAN (parallel), RS485 (BMS), WiFi (built-in) | |
| Efficacité | ||
| Maximum Efficiency | 98% | |
| Entrée PV | ||
| Compatible PV Systems | 12V/24V/48V | |
| Charge batterie | ||
| Maximum Charging Current | 20A | 30A |
| Données mécaniques | ||
| Product Size (W x H x D) | 240x170x102 mm | |
| Product Weight | 0.9 Kg | 1.06 Kg |
| IP Rating | IP31 | |
| Conditions de fonctionnement | ||
| Enclosure | IP20 (indoor & vented) | |
| Operating Temperature | 0°C to 55°C | |
| Fonctions de protection | ||
| Automatic Battery Voltage Detection | Yes | |
Les valeurs sont mesurées dans les conditions d’essai indiquées par la fiche du fabricant. Un tiret signifie que le fabricant ne publie aucune valeur pour ce modèle.
Disponibilité et conformité réseau en Égypte
| Marché | Égypte |
| Autorité / régulateur du réseau | EgyptERA, NREA |
| Devise de cotation | EGP |
| Fuseau horaire du support | Africa/Cairo |
| Couverture livraison et installation | Le Caire, Alexandrie, Gizeh, Assouan |
Les valeurs de cette page sont celles du fabricant, mesurées dans les conditions d'essai indiquées par la fiche technique : elles ne changent pas d'un pays à l'autre. Ce qui change, c'est l'agrément exigé avant la mise sous tension : en Égypte, il relève de EgyptERA, NREA. Vérifiez le code réseau, les exigences d'importation et toute certification locale auprès d'eux, ou auprès de nous, avant de commander.
Caractéristiques principales
- MPPT tracking: Follows the array's maximum power point as light and heat change.
- Three-stage charging: Bulk, absorption and float, with temperature compensation.
- Auto voltage detection: Recognises the battery bank's nominal voltage on connection.
Questions fréquentes
What size battery bank does the SCCM2024-II suit?
It charges at up to 20 Amps and auto-detects 12V/24V (Auto).
What is the maximum solar array the SCCM2024-II accepts?
Open-circuit voltage must stay under 95V, and maximum input power is 12V - 280W / 24V - 550W.
Where can this controller be installed?
Indoors only. The enclosure is IP20 (indoor and vented), rated 0 °C to +55 °C ambient and up to 90% RH non-condensing.
What size battery bank does the SCCM3024-II suit?
It charges at up to 30 Amps and auto-detects 12V/24V (Auto).
What is the maximum solar array the SCCM3024-II accepts?
Open-circuit voltage must stay under 95V, and maximum input power is 12V - 420W / 24V - 830W.